tobsen
-
Posts
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by tobsen
-
-
Tobsen, I applaud your willingness to do this bulk order (although I strongly doubt you have any idea what you are getting yourself into). On the other hand, you're going about this the wrong way imo.
Thanks, yes its my first bluk order i like to realize. I have ordered on many groupbuys already and i think i can manage it, because i have lot of sparetime the next time.
1) This is going to be a big bulk order. I am not sure if I would want someone I neither know nor have done any business with as of yet and of whom I don't even know if he's ever handled a bulk order (let alone one of this size).
Well as i mentioned, its my first one and TK asked if there are any volunteers to handle the bulk order. I´m not that known, thats right, but for me it would be nice to contribute something to the Forum.
2) Before jumping the gun and starting this, you certainly could and in my opinion definitely should have asked TK if it's okay that you do that and Smash if he's ready and willing to do that order. Contacting Smash after you already announced the order is not really the nice way to go about things. You're basically offering to sell an unknown number of core32 pcbs and kits, not even knowing how many are in existence.
Yes, i wrote the mail a bit late, to get some piece of information about Smash´s stock on these PCB´s.
3) The board in your pictures is not what's being shipped. Generally not a good thing to do.
4) I do understand that for some reason people are very excited and can't wait to get their hands on a core32. Still: go easy on this. The core32 hasn't even been announced yet and you're already in full-blown megasale mode. Patience is a virtue.
Concerning the anouncement, I´m a bit surprised that its a bit early, because Smash has it already in his shop and on ucapps its also listed. Patience is a virtue. Thats right, if it takes time, than it takes time.
As I said, i would be glad to to this job, even if its a bit too early. If Smash TV does not ship such amounts, it would be pity. But i assumed that if he sell these PCB´s on his shop, he will have already a bunch of this industrial-made PCB´s
-
PUNK
-
well, already done :)
CORE STM32 Bulk Order
-
CORE STM32 Bulk Order from Smash TV
Since there seems a lot of request of the Core32 Module it would be nice to get a few people, to make a bulk order for Europe, to save some shipping costs.
Available are:
Core32 Module PCB With IC
STM32 chip presoldered, Double Sided, Plated through holes, HASL plated, Soldermask, Silkscreen legend. RoHS Compliant.
$25.95
http://www.avishowtech.com/mbhp/mbhp_core32r1.html
and:
Core32 Parts Kit without PCB
Does not include board or STM chip.-
Includes all parts that mount directly to the board.
$20.00
Therefore i´m collecting orders, either for the PCB or the complete Kit. As soon i have an amount of orders I´ll post the price and paying Info (Paypal only!) on this Thread. As well as the Taxes that we possibly have to pay.
All shipping costs and charges will be divided on all buyers.
Please post how many PCB´s or Kits you like to order.
e.g.
2 x PCB
3 x Kits
After enough orders are collected, check your emails daily and make a PayPal payment as soon as you receive a payment request. I´ll post any news here on this Thread.
If you cant pay dont make an order.
regards
T.
ORDERS:
rosch 1x PCB + 1x KIT
olga42 2x PCB + 2x KIT
Intermedi8 1x PCB + 1x KIT
tobsen 1x PCB + 1x KIT
-
no my hands are too large :)
however, if someone has one, or has the possibilty to order one and send it to me for common shipping costs, i´ll take one.
regards
T.
-
Yes on Smash TV its available, but shipping is more expensive than the PCB KIT to Germany. Airmail is not available, unfortunately.
-
Looking for the presoldered version...
for shipping to germany
Thanks and regards
T.
-
Hello,
Either a complete working Module or a PCB for the OPL3.
Thanks and regards...
T.
-
I´ve uploaded a short Video with a Filter Module,
the MB Sequencer is involved too...
-
Hallo,
Für ein kleines Live-Setup hätte ich gern ein Rack-Synth (microQ,MicroModular,etc.)
und ein MB Rotari Controller. Jetzt stellt sich mir die Frage, ob Parameterwerte direkt von dem Midicontroller abgeholt werden oder nicht. Sonst würde es beim Benutzen des Controllers lästige Parametersprünge geben.
Der microQ hat die Möglichkeit des "Controller-Send", d.h. er sendet per midi + sysex die aktuellen Werte der Parameter mit, jetzt hoff ich doch, dass die Midibox das ganze richtig interpretieren kann...
Benutzt jemand einen Synth mit Controller und könnte mal Auskunft geben, wie es da mit Controllersprünge ausssieht...
Interessant wäre zu Wissen welche Synth noch die aktuellen Werte der Parameter übertragen...
Danke!
t.
-
Done. Usually i have no problems with this hoster... :-\
time to check another out...
-
Thank you for commenting :)
No it´s not the MB808, its from Fruity Loops as well as the synth.
The bassline is just made with se midibox-SEQ...
I hope the next time it´ll be the MB-FM...
greetings
-
but a minimal & experimental meditation with some 808 and Fm Synth, no editing...
just to keep it raw...
-
Hi,
Sehr schön!, wenn da nicht die Fehlersuche wäre - das treibt mich auch manchmal in den Wahnsinn...
Ich probier´s immer mit:
- Kabel zwischen den Modulen vertauscht?
- alle gepolten Bauteile richtig rum?
- kommt Saft an?
- kalte Lötstellen?
- keine Beinchen von den Ic´s abgeknickt
- nochmal checken
- nochmal checken u.s.w.
Als ich MiosStudio erneut öffnete, verband ich zuerst die Geräte miteinander.
ist das so richtig?!? Ich hab übrigends ein USB-Midi-Interface für günstige 12€ in der Bucht erstanden.
Hätte noch den Microsoft - Dingens abgeschaltet...
Der Rest sieht ganz gut aus, an der Software dürfte es nicht liegen, denk ich...
Viel Erfolg beim testen!
-
Awesome, relly great work!
Looks like a holy grail...
-
Fantastic!
-
Hallo Tobsen,
wie lang sind eigentlich die Kabel zu (und zwischen) den einzelnen Modulen?
Encoder-Problem: hast Du schonmal einen zusaetzlichen R+C am Ende der DIN-Kette ausprobiert?
Gruss,
Thorsten.
P.S.: weitere Erfahrungsberichte wuerden mich sehr interessieren
Die Kabel sind sehr knapp, ca. 30 - 40 cm, die Module sind alle von hinten auf dem Panel montiert.
Allerdings, hatte ich erst nur SC bzw. nur RC terminiert. Mit beiden Pins scheint es jetzt zu klappen, der Encoder von Step 9 und 15 funktioniert wieder normal.
Bis jetzt hängen wieder nur 300R Widerstände dran, wie bei Stuart...
Werde die Tage noch die Kondensatoren dazuschalten und dann nochmal Ergebnisse posten...
Danke! :)
-
Also so ganz komm ich nicht klar:
Am DOUT Pin:SC oder RC mit R+C gegen 5V und der Encoder von Step9 nimmt dann immer den maximal Wert an. Das Flimmern ist aber komplett verschwunden, das tut den Augen richtig gut...
Könnte jemand mal Erfahrung mit der R+C Kombi Posten...
Danke!
-
... oder vielleicht Nagellack-Enferner??? ::)
Hup´s
Ja klar!, Nagellack Entferner natürlich...
-
the chips are here, thank you very much!!! ;D
-
Dabei würde ich aber aufpassen, dass beim Lösen von dem Toner, ich nehm immer Nagellack, die Farbe nicht abgeht. Mit Nagellack würde die Sprühfarbe definitiv abgehen...
Ansonsten hab ich schon schöne Panels mit bedrucktem Papier unter einer Klebefolie gesehen...
-
paid, too...
-
Das muss ich alles in Ruhe studieren, hab gerade leider wenig Zeit...
Wollte auch nochmal den Vorschlag mit dem 150R zurückziehen, da zwei shift register vom DIN innerhalb kürzester Zeit abgeraucht sind. Soweit ich es überflogen habe steht hier auch warum...
1000 Dank für die Vorschläge!
-
Thanks for the comments!!!
The buttons would look more neat if they have the same length. In my case it was impossible with a handsaw...
STM32 based Core Europe
in Bulk Orders
Posted