cswift

The other possibility allowed me to load the v1.9f .hex file. The final connection that worked was: MIDI Devices Readable MIDI Devices - Writable MIDI Studio Out Port to Turtle Beach USB MIDI 1x1 Turtle Beach USB MIDI 1x1 to MIDI Studio In Port Whew, now I may be able to load the Application. If I need to go back to the READY prompt on IDs 1 & 2, can I do it by reloading MIOS v1.9f? Also. is MIOS Studio Help - Main supposed to have any text or illustrations? And is there a way to capture and print any of the instructions or screens in MIOS Studio? Thanks again for your help. Carl Swift, Houston, Texas

Terminating attempt to upload for this evening. Thanks Carl

TK, I measured the 5V while waiting for something to happen and I may have shorted it momentarily. Which could have caused the "Uploade request and Sending block. Still no response. Carl

I powered up the CORE. It displayed the MIOS version v1.9e and then displayed the 1INOff --- 0o. I started MIOS Studio, connected the Turtle Beach USB MIDI 1 x 1 to the MIOS Studio in Port, loaded mios_v1_9f_pic18f452.hex. I did not tick the "Wait . . " box and clicked the start button. MIOS Sudio displayed the start dialog up to ". . . forcing reboot! After several minutes, MIOS Studio displayed "Received Upload Request" and then displayed Sending block 00000400-000004FF". It has been about 3 or minutes since that message appeared and nothing more has happened. Should these events require this long? Carl

Hi, I’m a newbie and I need some help with my MIDIBOXes. I am midifying an electronic organ. I have been working with electronic hardware for many years and am experienced at quality soldering. At this time I have built 3 COREs and 7 DINs from kits I purchased from Smash TV. (Very nice PCB design, BTW) Their IDs are 0000 0000 0000 0000, xx1, xx2. ID 0 has MIOS v1.9e. ID 1 & 2 have MIIOS v1.9f. I have a 2x16 LCD display which appears to work correctly. I am trying to bring all three COREs up. When first powered up, all three COREs came up, displayed the MIOS information and displayed READY. I believe I followed the instructions accurately for installing the Application MIDIO128.ini file after conversion to a .syx file. Sysexbox.exe appeared to function normally for a few blocks and then started giving occasional error codes such as 0B 5D. Now, when I apply power to the any of the 3 COREs, the display shows 1INOff --- 0o. I have tried to update the MIOS in ID 0 from v1.9e to v1.9f using MIOS Studio. I followed the procedure for a MIOS HEX Upload using the technique outlined at the bottom of the page where the “Wait for Upload Request†box is ticked, the program started, and then power is applied to the CORE. The message “Received Upload Request†appears, then “Sending block 00000400 - 000004FFâ€, and then the program appears to hang. At this point, I am stuck. If there is a hardware error, I made it on all 3 COREs. I would appreciate any help. Thanks. Carl