-
Posts
115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by kroutshev
-
-
Hi,
i'm interested but i can't edit wiki. Is it possible to register a new account ?
Thanks.
-
Hi,
is it normal that i have not received pm ?
K.
-
I put a request in for a list of whats in stock so we dont have to do this "do they have this or that?" thing anymore
Yes i think that's the best thing to do !
-
This is where i have read that => http://www.sifam.com/knobDetails.asp?kType=Knobs_Collet&Type=3_02_S151
Base diameter: 15.5 (mm)
Height (inc cap): 14.3 (mm)
Shaft Depth: 7 (mm)
2 Colour: Y
Pack size: 10 pcs
And about fussy one 0.5$ ea, are they available ? and i need pointer close to shaft, is it ok ?
Thanks.
Bruno
-
Hi Altitude,
Ok in that case i'd like to order knobs which are for 0.50 ea, fussy knobs with Grey Base/Black Middle and Red pointer
I need 80 of them.
And about "3/02/S151 250" knobs, i have read that i can order 10 minimum.
I need 20 of them with C151 caps in red.
Please could you tell me if i'm right ?
Thanks a lot.
K.
-
Ok Altitude,
i'm not sure about two colour soft touch collets, they are used in x0xi0 kit and i have asked Brian to be sure about reference.
I suppose that's 3/02/S151 006 Pointer close to shaft. About these knobs do you if i need to order caps or it's already include ? i need those which caps are removable to mount them in the "Bank and Mode selection" x0xb0x potentiometers.
I don't know if i must order about shaft size 6 mm or 1/4 in ?
[Edit]
Ok confirmation from Brian,
3/02/S151 250 quantity = 20
About caps color and quantity reference C151
red 4
Orange 4
Green 4
Blue 4
Yellow 4
The others one i need : 3/04/DRP110 006 and pointer close to flat, Black Body
Quantity and colors for Pointer :
Red 16
Orange 16
Green 16
Blue 16
Yellow 16
If you have advise for x0xb0x use i'm very interested in case i have made a mistake.
Thanks a lot.
K.
-
I'll finalize my order that week-end.
Have a nice time.
K
-
Ok, i'll check dimensions tonight and i will post asap ! Thanks.
-
Ok, i have to cut the pots like when you used knobs provided in ladyada kit, few years ago ;-)
But the diameter is ok. In that case i'm interested !
-
Hi Guys,
i'm interested to buy them for x0xb0x, i like these one "3/04/DRP110 006"
Can i use them for my x0x or i must modify pots before ?
Thanks for your help.
K.
-
Hi, if there's a bulk order for these knobs i'm interested ! I need few for x0xb0x ! Thanks K.
-
Hi Phunk,
i have received knobs today !
Perfect, thanks a lot.
K.
-
Ok i have tested with mono cable and i have the same phenomen ... sound is very low when jack is entirely plugged ... i have checked solder joints and it's ok !!
Do you think that jack plug is bad ?
-
Yes i have tried another cable but this cable is used actually with my first sammich and it's good !
Yes i have checked solder joints.
About Connector i have a question to wilba : the two connectors include into kit are the same ? Is there on stereo and the other mono ?
Thanks.
-
Hi Reboot :-) !
Yes neutrik connector !
-
Ok, I have resolved my problem ! when i unplug a little my cable, the output volume is good !
Thanks for the answers :-)
But the thing that i don't understant that it's the same cable which i use with my first sammichSID ??? in the first one i use 6582 and in this one 6581 !
Why i have to unplug a little bit ? it's a stereo cable !!
-
One thing Hawkeye, i had during 3 second normal volume, only one time the first time i have power on it and now i've got always low volume. Even if i power off and start again after i've got always low volume output and same thing with 6582 sid's.
I will try testtone app !
-
About cable, yes it's stereo jack !
-
About rate if my memory doesn't fail it's 1.33 A !
About jumpers, i take care a lot about that, to be sure that i don't make a mistake !
About 6581 using voltage : 12.46 V is ok for 6581 ? it's not too high in regard of 12 V reference ?
-
Ok,
About psu :
voltage output is 12,40 V DC . I have checked into sid pin and i have that voltage.
I have tried with 6582 SID and i have the same problem.
I had a correct volume during 2 or 3 seconds the first time that i have power on with 6581 sids and after that i always have low volume into output !
I have removed 6581 and put 6582 and i have the same problem : low output volume.
I havn't tried with one 6581 ! always with 2 sid's. I will try tonight !
Thanks Hawkeye.
-
It sound like my output is not stereo but mono ! some patches doesn't work at and the others have very low volume ... I have checked if i have short between pins of the two 6581 supports but everything is good ! Anyone have an idea where i have to search ? Thanks.
-
Une question : as tu le ventilateur en fonctionnement ?
-
Ok, you're right guys, psu was in fault. i have changed for another one, measures are 12,45 V into sid pins. I power on, lcd and leds are ok, i start my sequencer, i listen the sammichSID, output volume is correct but after few seconds volume is very very low ...
i thought that i have burned my 6581, i remove them and install 6582 checked before into that sammichSID but same thing output volume is very low ???
Arghhhhhhhhhhhh
What's the problem ?
-
I have tested with one sid and same problem, no power on from lcd and leds.
Ok i will check specs of my psu !
ALBS Waldorf knobs bulk order Fall/Winter 2013 (DK16-190V3 A.6/4,5 and DK38-144 A.6/4,5)
in Bulk Orders
Posted
Yes Kristal you're right, that's ok now !