wavewalker
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by wavewalker
-
-
On 4/7/2021 at 12:29 PM, latigid on said:
If you think an available commercial device can fulfil your needs, then get one! DIY is a different thing. It is potentially more expensive and you have to put in the tools and effort to finish things, but the journey can be very rewarding and sometimes you can obtain tools that are not found elsewhere, often for the very reason that they would be impractical or uneconomical to produce in scale.
Thanks for the post !
Devices for music production are for Music composers/producers/makers ( pro and hobby type )
for the hobbyists or enthusiasts , the Diy "way" can be ok , because they probably have free time to spend on it.... ,
for the Pro is different ,
as the time already never enough for music productions , ....let alone other things.....
frequently a necessary specific device like the (cool) MBProgramma is not available on the market ..
(..despite the fact that the marketing departments of the big companies are always on the alert )
and then the Diy (where possible) become the only one way,
but if it require more than a certain amount of time (unfortunately (always too little...)
becomes an option not possible (for "Pro") ,
without a technician capable in the matter ,
but considering the legitimate cost ,
too often "the game is not worth the candle" .
it would be relatively more simple , usable , with probably a funny part too ,
if it were like the assembly boxed stuff (at least for the hardware part).The MidiBox projects ( all versions/types ) , and all the guys that develop their projects are a very very very incredible cool universe,
obviously TK included !
The MBProgramma is a target hit in full ,
as a very useful programmer for the too much software to use to make music is necessary ,
as a community that share the realization of the software patches be equally ,
pity that , its accessibility is not easy .
it is certainly not a novelty since the internet has spread ,
that it is common practice of many ,
make devices to sell starting from prototypes , infos , etc..
found in the world of diy....
(..ok , it happened even before internet, even if in other ways.. ,
... probably as also for that on the video...)
cheers
-
14 hours ago, Hawkeye said:
@wavewalker - it has been delayed due to too many projects brewing in the kitchen :). Maybe, one day... :)
Best regards,
PeterThanks for the post !
" Maybe, one day " , mean never ?
as the "One" (showed in the video above )will be available used (at half price)
it won't make any sense to consider the "Diy" option ....
( ...just think to the quantity of time required to find all the parts + the assembly ,and then the settings ....)
cheers..
-
Any up ?
..... or " Transformed " in this "One" ?
-
On 12/8/2017 at 11:51 AM, Hawkeye said:
....if you have the time, wait for MBProgramma V2 (that will be also and always be based on MBNG), that will have PCBs available and will be well-documented. It will just take (a lot) of time, but it is definitely on the TODO-list.
Good enough for a start-point? Imho you really need to decide on what you really want to do FIRST, is it a MBSID, a MBSEQ or a MBNG?
This thread here should be used primarily for Programma discussion...Many greets,
Peter+ 1 here for "Programma V2" !!!!
-
On 2/24/2016 at 5:47 AM, arumblack said:
Would it be possible to use 4X 2x20 LCD display instead of 2X 2x40 on a MBSEQ V4? I have a small supply of really nice VFD's but they are 2X20 character HD44780 compatible.
Thanks!
... And it would be so really cool....
to have something like a display like 2X8 or 3X8 for each encoder
( 16 encoders with 16 display , 24 encoders with 24 display , etc...)
I don't remember now if here or elsewhere a controller project for synth edit-control
with 16-24 oled displays , each for a single encoder..
(also in group of four as in the attached)
On 2/24/2016 at 8:50 AM, latigid on said:Could work, but you'd need a custom firmware and separate select lines for each LCD.
http://www.ucapps.de/mbhp/mbhp_nxclcd_mios32.pdf
http://www.ucapps.de/mbhp_lcd.html
MIOS8: A special driver module is available which allows to connect up to 8 CLCDs to a single core (clcd_multi). Displays have to be selected with the USER_LCD_Select function by the application. Connectivity: any free pin of the PIC can be used for the enable line. For instance, if your application doesn't use the analog pins at J5 of the core module, you are able to connect 8 additional LCDs. You could also program a multiplexer interface in order to address even more LCDs by routing the enable line to one PIC pin. Wiring Diagram: mbhp_nxclcd_mios8.pdf MIOS32: the standard CLCD driver is prepared for controlling up to 256 devices selected via MIOS32_LCD_DeviceSet(). Please understand this value as a theoretical possibility, physical parameters (like cable capacities) have to be considered as well. ;-) Connectivity: see this MIDIbox NG Manual Chapter. Wiring Diagram: mbhp_nxclcd_mios32.pdf
....hmmmm .. , it is possible TK done a recent upgrade about ?
-
On 11/12/2016 at 6:50 PM, Hawkeye said:
unfortunately, Fairlightiii vanished from the forums a while ago and we have no gerbers to reproduce these PCBs. ......
....And did not even say "goodbye"... II ( (( (
( at least to know that it is not contactable...)
anyway thanks a lot for all things shared !
...in case you come back, give us a "shout" .
-
-
Im alive :D
hello
i'm thinking to build 1 traktor control ,
checked many pages......(ucapps,wiki,etc..., core,din,dout,ain,etc........)
about software , there is a traktor file as "interface" for hardware and software?
thanks
ww
-
hello
thanks for post ,for now no need trs etc...
i'm looking for build a "100% discrete" audio in out "switcher"
for my hi fi setup
kind regards
8)
-
The problem with relay based matrices is that they are huge, and expensive.
TK: :o What's THAT?! :D
but sound remain clean...............
hi guys
i'm looking to get a device similar (as concept) to the monster "matrix"
but much little then you done ,
nobody know how drive relay like this
or similar with gold plated contacts,
thanks in advance
in case you post some info about
regards
ww
-
There is a discussion of a MIDI controlled audio switcher, but I don't think it's done yet.
thanks for post
i seen that project last week
is an "ic" way audio "matrix"
ww
-
Depends on the relay, and which chip is driving it.
Most PIC outputs can sink or source about 20 to 25 ma.
That is not much current to work with.
The 74HC595 chips used in the DOUT modules must stay below 35ma per pin, 70ma per chip.
Other driver chips may be available, I'll let you look them up.
If it's an electromagnetic relay, you also have to protect the output from the voltage spike that you'll get when the output turns OFF.
Many relays have an optocoupled input (LED). These are a much better choice for driving from an output.
Hello and thanks to all for reply posted
what I would want to understand is if i can make a device
with midibox , for control a little audio matrix for my hi-fi setup,
a box with 8 stereo in + 4 stereo out , for select with a remote control (processed by pic)
different audio device input like cd player,turmtable,computer out,cassette,old revox b77,blu ray, etc..
and send the "source" to my hi-fi amplifier ,
and for a clean audio signal , i cannot use IC but "discrete" relay as in-out "doors" ,
i seen the skeme for dout where midibox can drive ic-relay ,
but is the same circuit for drive a "discrete" relay?
thank so much to averybody give an help about
kind regards
ww
-
hello
looking for Momentary switch + led
"circle or square"
but with led (for show "on" status)
any info,part code ,supplyer about are wellcome
thanks in advance
ww
-
hello everybody
is this thread "death"?
???
-
hello
i seen that midibox drive "cv" devices
my question is :
midibox can drive "discrete" relay (no "ic")
???
-
Hey Guys Why not a page as BOM with a list of "basic" parts and sources ?
i'm new of this nice place,
from some day i'm turning around ,
.....up and down ....
(think to have seen +/- 4/500 pages)
looking for right parts for my first "midibox" controller (faders,encoders,motorfaders,buttons+led,etc...)
after seen all pages at ucapps site and much pages of this forum and wikky ,
not found a simple , superfast page as "BOM" list ,
where all basic and tested parts compatibles with midibox ,
(except for: core,ain,din,dout,mf .....etc.... cards)
and sources are listed by section , obviously with links and info for active "groupbuy"
example :
encoders section:
type of encoder -code if available-supplyer-datasheet/manufacturer , etc....
buttons section
button+led -code if available-supplyer-datasheet/manufacturer , etc....
button-led -code if available-supplyer-datasheet/manufacturer , etc....
faders section
motorfader-code if available-supplyer-datasheet/manufacturer , etc....
fader 60mm-code if available-supplyer-datasheet/manufacturer , etc....
fader 100mm-code if available-supplyer-datasheet/manufacturer , etc....
etc.....................
please mr "admin" it is possible?
thanks
ww
-
HELLO
where is "brian" ?
???
please come back to this nice place ,
:(
-
hello
midibox can drive this lcd (see pictures):
http://www.voti.nl/shop/catalog.html
or a touch sensitive lcd panel ?
-
thanks guys ! ! !
seen this good page
http://www.midibox.org/dokuwiki/doku.php?id=parts_faq
only an info about button with led : if i use momentary button (as suggested )
when i push the button the core receive the command and led go on with light,
but:
when i release the button the command and the led stay in on "status" until i re-push the button
or go in off ?
thanks in advance
ww
-
hi
still available some encoder set?
ww
-
Still available?
ww
-
hello
the midibox run with momentary type led buttons (push and keep push =ON , release =OFF)
or not "momentary" type (push =on , re-push =off) ?
???
thanks
ww
-
:o :o :o
incredible
ww
-
hello
interested to build one of this for my "pt" set
there is someone have made a working unit?
thanks
ww
MBProgramma: hardware synth patch programmer (MBNG variant with a defined hardware set)
in MIDIbox User Projects
Posted · Edited by wavewalker
Hope you really have so much time (and more patience too)
because here really seem that nothing happen in fast way... ( unfortunately..)
cheers.