tomarkus

Dropping price to 300 euro.

Dropping price to 300 euro.

This is not the same sammichSID - take a closer look on the photos and description.

Hi, I would like to sell my fully assembled (by professionals) sammichSID with 2x 6582 SID's inside - of course everything is working like a charm. Price: 300€ Shipping: free Shipping from: Poland Preferable payment method: PayPal More pictures: CLICK Preferably within EU to avoid customs and delays. SOLD

I'm dropping the price to 350 euro with shipping. PM me if interested.

I do not understand what this fuss is about - here are the links to a previous fleamarket offerers asking 400 euros for theirs sammichSID's: I don't want to earn anything here - I just want to regain invested cash, I've payed a lot of money to a professional soldering company and SID modules.

I can lower the price to 400€.

Hi, I would like to sell my fully assembled (by professionals) sammichSID with 2x 6582A SID's inside - of course everything is working like a charm. Price: 300€ Shipping: free Shipping from: Poland Preferable payment method: PayPal More pictures: CLICK Preferably within EU to avoid customs and delays. SOLD

Sold.

New price: 120$ + 10$ shipping.

Here is the answer: Case closed.

Hi, I have bought a PSU for my sammichSID, but I would like to know how to set polarity correctly - here is the picture of the PSU: https://www.dropbox.com/s/ie8xqnm34t4f4cz/pwr.jpg I have looked for this information on the wiki pages and build manual, but I could not find it. Can somebody advice?

Hi, I would like to sell my complete MB-6582 Baseboard Parts Kit + Control Surface PCB bought in SmashTV shop: SOCKETS: 9x 8 pin 16x 16 pin 8x 28 pin W 4x 40 pin BASEICA: 1x Bridge Rectifier W04 5x 1N4148 2x 7809 Voltage Regulator 1x 7812 Voltage Regulator 1x 7805 Voltage Regulator 4x Crystal 10MHz HC49 LP 1x BC337 16x BC547 BASE*CAP: 2x 2200uF Electrolytic 8x 1uF Electrolytic 10x 10uF Electrolytic Cap 1x 100uF Electrolytic Cap 8x 33pF Ceramic Cap 24x 470pF Ceramic Cap 16x 1nF Ceramic Cap 39x 100nF Ceramic Cap 1x 330nF Ceramic Cap 16x 22nF Poly Cap BASE*RA: 4x 100 Ohm Resistor 20x 220 Ohm Resistor 34x 1K Resistor 1x 1.2K Resistor 1x 5.6K Resistor 30x 10K Resistor 10x 10K Resistor network (6-pin) 5x 10K Potentiometer PINHEADERS: 4x 40 pin SIL pinheader 2x 80 pin DIL pinheader BASE*J: 2x 5-Pin DIN Socket 1x 7-Pin DIN Socket 4x Stereo Phono Jack 19x Jumper 1x Power Switch BASEICB: 1x 6N138 8x 24LC512 5x 74HC165 11x 74HC595 PIC: 4x PIC18F4685s SmashTV price: 161 $ My price: 135 $ Picture: https://www.dropbox.com/s/rtff3fcar850s4y/mb.jpg Preferably within EU to avoid customs and delays.

Hawkeye, Ilmenator - tanks for your support and help! After switching ICs my sammichSID works like a charm!

Thanks! ICs are my main suspect here. According to Base PCB layout on IC2L and IC3L positions there should be 74HC595 placed, but I have MM74HC165N/MC74HC165N plugged, and 74HC595 are placed here: IC1 and IC2 (CS PCB) Can somebody take a look on photos and confirm that this is the case? I would not want to set my sammichSID on fire ;-) I'm using 12v and 1A adapter - I've checked voltages, no issues. I have checked all Base and CS PCB voltages - they're all correct (according to my multimeter and chapter 5 of building instruction :)) I have checked these as well - the voltages are correct despite the small scratches (visible on the last photo). Greets, Tomasz

Hello! Today I have received my assembled sammichSID. Unfortunatelly, it is not working as supposed to work. There are 2 major symptoms: 1. Knob and buttons are not working at all (not even one). 2. When I launch Ableton Live and start playing MIDI notes through sammichSID I can hear only mono buzz despite Lead Patch selected (it is automatically selected after turning on the device). Of course my cable routing is proper. I can see LED blinking (received MIDI notes), but my sound card/headphones gives me only barely audible buzz. More information: 1. I can flash the device with the latest firmware available without any problems, 2. I can load a sound bank (v2_vintage_bank.syx) via MB SIDV2 Editor v0.5, 3. LCD and LEDs are working normally (tested with sammichCSTest.hex, Ableton and MOS Studio), 4. After reading some other posts I have double-checked that: - heat-sink is not touching anything, - RN1-RN4 are in correct positions. Here are the photos - maybe I'm missing something: CLICK HERE Any ideas what might have gone wrong? Any help is appreciated.