-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by tomarkus
-
-
SOLD
in Fleamarket
Dropping price to 300 euro.
-
SOLD
in Fleamarket
This is not the same sammichSID - take a closer look on the photos and description.
-
SOLD
in Fleamarket
Hi,I would like to sell my fully assembled (by professionals) sammichSID with 2x 6582 SID's inside - of course everything is working like a charm.Price: 300€Shipping: freeShipping from: PolandPreferable payment method: PayPal -
SOLD
in Fleamarket
I'm dropping the price to 350 euro with shipping. PM me if interested.
-
SOLD
in Fleamarket
I do not understand what this fuss is about - here are the links to a previous fleamarket offerers asking 400 euros for theirs sammichSID's:
I don't want to earn anything here - I just want to regain invested cash, I've payed a lot of money to a professional soldering company and SID modules.
-
SOLD
in Fleamarket
I can lower the price to 400€.
-
SOLD
in Fleamarket
Hi,I would like to sell my fully assembled (by professionals) sammichSID with 2x 6582A SID's inside - of course everything is working like a charm.Price: 300€Shipping: freeShipping from: PolandPreferable payment method: PayPal -
-
New price: 120$ + 10$ shipping.
-
Here is the answer:
Case closed.
-
Hi,
I have bought a PSU for my sammichSID, but I would like to know how to set polarity correctly - here is the picture of the PSU:
https://www.dropbox.com/s/ie8xqnm34t4f4cz/pwr.jpg
I have looked for this information on the wiki pages and build manual, but I could not find it. Can somebody advice?
-
Hi,
I would like to sell my complete MB-6582 Baseboard Parts Kit + Control Surface PCB bought in SmashTV shop:
SOCKETS:
9x 8 pin
16x 16 pin
8x 28 pin W
4x 40 pin
BASEICA:
1x Bridge Rectifier W04
5x 1N4148
2x 7809 Voltage Regulator
1x 7812 Voltage Regulator
1x 7805 Voltage Regulator
4x Crystal 10MHz HC49 LP
1x BC337
16x BC547
BASE*CAP:
2x 2200uF Electrolytic
8x 1uF Electrolytic
10x 10uF Electrolytic Cap
1x 100uF Electrolytic Cap
8x 33pF Ceramic Cap
24x 470pF Ceramic Cap
16x 1nF Ceramic Cap
39x 100nF Ceramic Cap
1x 330nF Ceramic Cap
16x 22nF Poly Cap
BASE*RA:
4x 100 Ohm Resistor
20x 220 Ohm Resistor
34x 1K Resistor
1x 1.2K Resistor
1x 5.6K Resistor
30x 10K Resistor
10x 10K Resistor network (6-pin)
5x 10K Potentiometer
PINHEADERS:
4x 40 pin SIL pinheader
2x 80 pin DIL pinheader
BASE*J:
2x 5-Pin DIN Socket
1x 7-Pin DIN Socket
4x Stereo Phono Jack
19x Jumper
1x Power Switch
BASEICB:
1x 6N138
8x 24LC512
5x 74HC165
11x 74HC595
PIC:
4x PIC18F4685s
SmashTV price: 161 $
My price: 135 $
Picture: https://www.dropbox.com/s/rtff3fcar850s4y/mb.jpg
Preferably within EU to avoid customs and delays.
-
Hawkeye, Ilmenator - tanks for your support and help!
After switching ICs my sammichSID works like a charm!
-
Hi there and welcome!
Thanks!
not a Sammich user myself, but did you check, that all 74* ICs are in the right place (orientation and especially type)?ICs are my main suspect here. According to Base PCB layout on IC2L and IC3L positions there should be 74HC595 placed, but I have MM74HC165N/MC74HC165N plugged, and 74HC595 are placed here: IC1 and IC2 (CS PCB)
Can somebody take a look on photos and confirm that this is the case? I would not want to set my sammichSID on fire ;-)
If these are correct, the next question would be regarding your power supply - which type is itI'm using 12v and 1A adapter - I've checked voltages, no issues.
and can you measure voltages, when the unit is turned on?I have checked all Base and CS PCB voltages - they're all correct (according to my multimeter and chapter 5 of building instruction :))
As long as there is no "short" between the voltage regulator pins and no PCB traces are scratched, there should be no problem there.I have checked these as well - the voltages are correct despite the small scratches (visible on the last photo).
Greets,
Tomasz
-
Hello!
Today I have received my assembled sammichSID. Unfortunatelly, it is not working as supposed to work.
There are 2 major symptoms:
1. Knob and buttons are not working at all (not even one).
2. When I launch Ableton Live and start playing MIDI notes through sammichSID I can hear only mono buzz despite Lead Patch selected (it is automatically selected after turning on the device). Of course my cable routing is proper. I can see LED blinking (received MIDI notes), but my sound card/headphones gives me only barely audible buzz.
More information:
1. I can flash the device with the latest firmware available without any problems,
2. I can load a sound bank (v2_vintage_bank.syx) via MB SIDV2 Editor v0.5,
3. LCD and LEDs are working normally (tested with sammichCSTest.hex, Ableton and MOS Studio),
4. After reading some other posts I have double-checked that:
- heat-sink is not touching anything,
- RN1-RN4 are in correct positions.
Here are the photos - maybe I'm missing something:
CLICK HERE
Any ideas what might have gone wrong?
Any help is appreciated.
SOLD
in Fleamarket
Posted
Dropping price to 300 euro.