Search the Community
Showing results for tags 'default.mio'.
-
Hello, I connected my brand new ainser module to the "mainboard" Midibox 128 v3 and did some testing: the jitter is 20. I suppose I have to inform the Midibox about the connect Ainser module by editing the default.mio. #AINSER;Pin;USB1;USB2;USB3;USB4;IN1;IN2;IN3;IN4;RES1;RES2;RES3;RES4;OSC1;OSC2;OSC3;OSC4;Evnt0;Evnt1 AINSER;0;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x10 AINSER;1;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x11 AINSER;2;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x12 AINSER;3;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x13 AINSER;4;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x14 AINSER;5;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x15 AINSER;6;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x16 AINSER;7;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x17 AINSER;8;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x18 AINSER;9;1;0;0;0;1;0;0;0;0;0;0;0;1;0;0;0;0xB0;0x19 Is that right? And how? The ainser64 faders are on channel 1 by default: can I change this? The volume goes in the opposite way: low volume is high and vice versa. Shall I "re-soldier" the 5V and 0V of the faders or is there a software solution? Is there a way to define e.g. 1200 = minimum volume and 3500 = maximum volume? Maybe I missed a documentation, but I cannot find it... Can I plug the pistons in the Diomatrix module? I know how to change the channel, but should I edit some more things in de default.mio or should I edit the pc software (eg pc organ / jorgan etc.) nice regards, Robert