Changing channels and midi note outputs on MIDIO 128

[Orgautomatix]

Hello Everybody !

Little trouble for a non-specialist in electronics...

I'm making five MIDIO 128 to replace a few J Wale midi cards on different automatic music instruments  (organ, accordion, piano..). I get core kits from SmashTV, DOUT from myself and all is fine. Just a trouble with changing channels and outputs midi notes. I edited the midio.ini file with Notepad++ and tried to change outputs, for example:

                           

                            1 =  90 30 7F  91 30 00  @OnOff  (note on ch1 C3, note off Ch1 C3)

by this:                  1 =  91 31 7F  91 31 00  @OnOff  (note on ch 2 C#3, note off Ch2 C#3)

I uploaded the sysex with MIdiox without any problem, but no change for midi outputs ! I was able to only change  the midi channel if using the search/replace fonction of Notepad++ for changing all the "90" by "91". But no possible to change a few parameters on a line...I need to have more than one channel on each card. Perhaps I forgot something ? Am I wrong somewhere ?

Hope somebody could help me, not very easy to drive 5 Midio128 on only one channel !

Thank you by advance !

Chris

http://orgautomatix.blog4ever.com/blog/index-69227.html

[Orgautomatix]

Sorry sorry sorry !!!

I'd just realised that I was confunding Dout module and Midi out !!! So I was trying to change midi out parameters instead of midi in!

All is fine now, I've got the right note on the right channel.

Best regards

Chris

:)