Midio128: how to change the midi channel???

[alexglvr]

Hello,

I i put on my midi128 today, load the mios and the given .hex file.

Everything is working well....

The only problem, is that midi channel 1 is already used by my keyboard (hardware defined, impossible to change...)

I surched on ucapps and the forum, and here is what i anderstood:

I must change all the midiIN Configuration in the midiio128.ini, (replacing 90 xx by 96 xx (to have midi channel 7)), rebuild the .hex file and reload it...

I am right?

Is there an easyer solution?

Thank you for your help,

Alex

[cimo]

in main.asm there should be a parameter to change the common channel

:-\ nop there isn t, sorry, i was wrong.

Maybe you can just import that function from MB64 code?

[alexglvr]

i do not find it  ???

[cimo]

in main.asm there should be a parameter to change the common channel

:-\ nop there isn t, sorry, i was wrong.

Maybe you can just import that function from MB64 code?

ok i feel completely dumb now, but i can t find it myself, i was sure there was an option somewhere.. maybe it was just on serge vmidibox

[alexglvr]

so, i have a lot of .asm and .inc files.... and do not know what to change...

i also have a .ini to make a .syx.......

[stryd_one]

Do like what it says in my sig... Hint: you want the first link ;)

You might find a lot of learning can be had from reading the files too. There are comments in there that explain stuff.

Is there something in particular that's tripping you up?

[jimhenry]

In short, you set the MIDI channel in the .ini file as the second nibble of the command byte.