cimo Posted February 15, 2009 Author Report Share Posted February 15, 2009 buh it seems like i am not really able to get this stuff working as it should, light is a bit dim and slow if i go over 35W lamps Quote Link to comment Share on other sites More sharing options...
cimo Posted February 15, 2009 Author Report Share Posted February 15, 2009 Ok we are kinda desperate and will offer 30 EURO for a working circuit if sent within 24 hours, it has to trigger around 70W of power from DOUT to a 2n3055.I am looking for help locally so consider that i may find an answer here before sending me any offer.Simone Quote Link to comment Share on other sites More sharing options...
cimo Posted February 16, 2009 Author Report Share Posted February 16, 2009 Good news, using a 2n2222 instead of bc547 is giving far better results Quote Link to comment Share on other sites More sharing options...
cimo Posted February 17, 2009 Author Report Share Posted February 17, 2009 ok here you go in case somebody will need it: Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 17, 2009 Report Share Posted February 17, 2009 Thanks for sharing it cimo, and I assume this means you are having some success - Yay!Can I do the dance now? :) Quote Link to comment Share on other sites More sharing options...
cimo Posted February 17, 2009 Author Report Share Posted February 17, 2009 Thanks for sharing it cimo, and I assume this means you are having some success - Yay!Can I do the dance now? :)not 100%, i wanted to have the load between GND and EMITTER but it seems like i need a pnp transistor or some other kind of circuit. With this schem you have to isolate every single transistor cause the body (TO3) is COLLECTOR. Other little detail is that i have to connect the chassis to + and not to GND.Simone Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 17, 2009 Report Share Posted February 17, 2009 voodoo.Luck at you dude. Wish I could actually, yaknow, help....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.