space6oy Posted May 18, 2010 Author Report Share Posted May 18, 2010 got a 500mA adapter, MIOS studio's communicating fine now, but man it is taking FOREVER! Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 18, 2010 Report Share Posted May 18, 2010 "forever" because of errors or just slow to upload? Post screenshot after the upload, it should show the speed at the end. It couldn't possibly be slower than my M-Audio Delta 1010LT. Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 18, 2010 Author Report Share Posted May 18, 2010 just uploading very slowly. 83% now & no errors yet... (knock on wood...) Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 18, 2010 Author Report Share Posted May 18, 2010 (edited) just wrapped up, says there was 1 ignorable error solved. hour & 24 min is forever to someone impatient like me. :) Edited May 18, 2010 by space6oy Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 18, 2010 Report Share Posted May 18, 2010 OK something is wrong. It only takes 82 seconds for me. For the upload to work, both the PC and the PIC must be running their serial comms at the same speed, so it's not an issue with that... i.e. each BYTE is being sent and received OK, but there must be massive delays between bytes. The problem would therefore have to be at the PC end, since there's nothing at the PIC end that could slow down an upload. What kind if MIDI interface are you using? Perhaps there's a conflict with other USB devices or it expects to be in a USB 2.0 port or some other issue. Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 18, 2010 Author Report Share Posted May 18, 2010 that's a possibility... i'm at work on a PC w/ a USB midi cable. should head home & try it w/ my TM-1 (if the software will recognize a firewire connection instead?) Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 19, 2010 Report Share Posted May 19, 2010 MIOS Studio only uses MIDI ports. TM-1 should work, but not in any turbo mode, only standard MIDI baud rate. Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 19, 2010 Author Report Share Posted May 19, 2010 ok, at home on an intel imac, MIOS isn't even recognizing it now, via TM-1 or E-MU cable. Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 19, 2010 Author Report Share Posted May 19, 2010 tried it w/ my macbook pro, same deal. not even recognizing that it's there. Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 20, 2010 Report Share Posted May 20, 2010 Are you receiving the upload request in the MIDI In window? Quote Link to comment Share on other sites More sharing options...
space6oy Posted May 20, 2010 Author Report Share Posted May 20, 2010 no, i'm not. perhaps something to do w/ ableton live's daemon channels showing up as midi ins & outs? Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 20, 2010 Report Share Posted May 20, 2010 Let's assume that since you did upload successfully, the sammichSID MIDI Out should be working and unlikely to have suddenly stopped. Therefore it's probably a setup issue. You should be able to do a loopback (PC MIDI In connected to PC MIDI Out), play some notes on the keyboard and see events in the MIDI In window. Quote Link to comment Share on other sites More sharing options...
space6oy Posted June 8, 2010 Author Report Share Posted June 8, 2010 hey, sorry i've disappeared on this. been buried lately & haven't had another chance to work on it. just letting you know it's still on my mind... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.