JRock Posted September 18, 2010 Report Posted September 18, 2010 (edited) Hi. I meant to do this a couple days ago but Here it is. I should probably put this in the wiki but I am too lazy to figger' it out right now (hard days work and everything) Earlier this week I was looking for which knob went to which pad because I'm building my own CS. I built a rough copy and traced the knobs back to the DIN pads on the PCB. I know this will be helpful to someone at some point. I just put the generic functions. Clearly each engine has it's own specifications and they are all a little different, but you'll be able to get the gist of it for planning purposes from this. If somebody sees any mistakes Pipe Up! JD1: D6/D7 = Menu D4/D5 = LFO Depth D2/D3 = Envelope Release D0/D1 = LFO Rate JD2: D6/D7 = Envelope Sustain D4/D5 = Oscillator Release D3/D2 = Envelope Decay D0/D1 = Oscillator Sustain JD3: D6/D7 = Envelope Attack D4/D5 = Oscillator Decay D2/D3 = Envelope Depth D0/D1 = Oscillator Attack JD4: D7/D6 = Filter Resonance D5/D4 = Oscillator Decay D2/D3 = Filter Cutoff D0/D1 = ???? Wiki'd!!! Edited September 19, 2010 by JRock Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.