Eddie Curent Posted December 17, 2010 Report Share Posted December 17, 2010 I have some questions regarding the MBSEQ_HW.V4 and LEDs set up: MBSEQ_HW.V4 says: # SR Pin LED_TRACK1 1 0 LED_TRACK2 1 1 LED_TRACK3 1 2 LED_TRACK4 1 3 # SR Pin LED_PAR_LAYER_A 1 4 LED_PAR_LAYER_B 1 5 LED_PAR_LAYER_C 1 6 # SR Pin LED_BEAT 1 7 But on http://www.ucapps.de/midibox_seq/mbseq_v4_dout.pdf the order is opposite. I guess this is not a misstake, but why is it different? Next questions, further down: # SR Pin LED_GROUP1 11 0 LED_GROUP2 11 2 LED_GROUP3 11 4 LED_GROUP4 11 6 # SR Pin LED_TRG_LAYER_A 0 0 LED_TRG_LAYER_B 0 1 LED_TRG_LAYER_C 0 2 Is SR 11 the first shift register on board 2? Why is LED_TRG_LAYER_X = 0? Is it up to me to put in the numbers I want here? Quote Link to comment Share on other sites More sharing options...
findbuddha Posted December 18, 2010 Report Share Posted December 18, 2010 I think the labels on the DOUT PCBs are mirrored to what the Core numbers them, that's why the config file is mirrored to the PDF. There are 4 SRs per DOUTx4, SR 11 is the 3rd SR on the 4th DOUTx4. From MBSEQ_HW.V4: # LED assignments to DOUT pins # SR = 0: LED disabled # SR = 1..16: directly forwarded to DOUT pin 0 = disabled. You can make all of these selections match your hardware. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.