docljunior Posted May 10, 2012 Report Share Posted May 10, 2012 Hi There. I have built a Seq v4 Lite with the LPC17 core. The core seemes fine. I get past all the midi tests, the led on the expresso is flashing three times when booting and everything seemes right in Mios Studio. The Sd-Card is working and has been "formated" by the core. However the panel is not working at all. When I fired it up the first time there was no light at all :( When I tried the pushbuttons I got feedback in Mios Studio. If I remember correctly it told me exactly wich button I pressed, but after a while it reported buttons only occationally and randomly. Now it does not give any feedback at all. I have changed all four of the cables between the panel and the core, I have tested all the components on the panel and found nothing wrong (that I can spot with my limited knowledge), and I have preformed the midi loopback tests with expected results. Any thoughts about this would be very appreciated. Thanks! Kolbjørn Quote Link to comment Share on other sites More sharing options...
docljunior Posted May 14, 2012 Author Report Share Posted May 14, 2012 still no funk in seq lite.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.