production Posted September 26, 2013 Report Share Posted September 26, 2013 Hello, sorry for my English is not only a google translation of my french Well, I'm on the end of a MIDIbox64 for Hammond clone, but I do not understand how (despite the explanations I could Rescueing) replace the navigation buttons by datawheel in the program. I need help. Thank you in advance to all Quote Link to comment Share on other sites More sharing options...
TK. Posted September 27, 2013 Report Share Posted September 27, 2013 It requires some changes in setup_midibox64.asm and mios_tables.inc (as described in the files), but I must admit, that the change isn't straightforward... in addition you've to install the MIOS toolchain to recompile the application. Anyhow, I could change the setup for you and give you a .hex file... Next week after my holidays. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
production Posted September 28, 2013 Author Report Share Posted September 28, 2013 it will be super nice of you, thank you. And I await your return from holiday with impatience. Quote Link to comment Share on other sites More sharing options...
TK. Posted October 5, 2013 Report Share Posted October 5, 2013 Finally a preconfigured firmware where the left/right button can be replaced by an encoder: http://www.ucapps.de/mios/midibox64_v2_4f_with_datawheel.zip DIN Assignments: EXIT button at D7 SNAPSHOT button at D6 Encoder at D4/D5 Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
k-rAd MB6401 Posted February 20, 2014 Report Share Posted February 20, 2014 wow i could have used that a long time ago. just figuring out the encoder thing now and i built my box more than 6 years ago. ;) I'm going to have to modify it a bit and add that one encoder for up and down scene selection in ableton. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.