Compile asm file to hex of mb808

Kike · June 25, 2015

Hi everybody!

I am building a 808 with microlarge pcbs and mb808seq

I have uploaded the default mb808 hex file and everything works,

but I need to replace some dout triggers and enable the swingpot.

I have changed the asm files to do that but I don't know how to compile it to hex.

I have read the wiki page about that, installed needed apps,

struggle it for hours but i didn't manage it to work.

Even asked a friend to do that for me, he also didn't succeed.

Can someone see if I have done it right in the asm file and compile that to hex, please?!

I have attached the asm file setup_808_kike setup.asm

I have changed triggers to shift registers 1 and 4, added external triggers,

and enable the swing pot.

I want - bd to trigger from pin7 of shift register 1

- sd to trigger from pin6 of shift register 1

- lt to trigger from pin5 of shift register 1

- mt to trigger from pin4 of shift register 1

- ht to trigger from pin3 of shift register 1

- cp to trigger from pin2 of shift register 1

- ma to trigger from pin1 of shift register 1

- rs to trigger from pin0 of shift register 1

- cb to trigger from pin7 of shift register 4

- cy to trigger from pin6 of shift register 4

- oh to trigger from pin5 of shift register 4

- ch to trigger from pin4 of shift register 4

- ext1 to trigger from pin3 of shift register 4

- ext2 to trigger from pin2 of shift register 4

- ext3 to trigger from pin1 of shift register 4

- acc to trigger from pin0 of shift register 4

- and enable the swingpot

I have uploaded the mb808 app with swing pot but the lcd doesn't show changes of the swingpot.

Is that OK or is it something wrong with the swingpot?

I can't test it yet because the microlarge pcbs are in soldering status.

Kike · June 27, 2015

The problem is solved.

I did it.

No need for help.

Recommended Posts