CV setup help

I have all the necessary parts installed to use SeqV4 for CV, gates and triggers via the Line Drivers. I think this line: First edit the config file on the SD Card to use the AOUT_NG (i.e. #define AOUT_INTERFACE_TYPE 3) and save it ! from the Aout_NG configuration instructions has been replaced by a menu configuration as noted in the config file: # AOUT interface now selected in CV Configuration Menu and stored in MBSEQ_CV.V4 file # please scroll through the menu to find this page! Can someone c

This is a typo, the AOUT interface should be in MBSEQ_GC.V4 (and not MBSEQ_CV.V4) file. However, you don't edit this file directly, instead this file just stores the values that you changed in the CV configuration page. Gates are configured in MBSEQ_HW.V4 You've to ensure that the 3rd SR isn't assigned to any other function which could overlay the gate. Typical errors if the CV interface isn't working: no proper connection via J19, e.g. swapped signal lines too long cable between core and AOUT(_