We're just about ready for launch of the new SEQ v4+. This thread serves as a proper introduction, you can also ask questions on hardware etc.
I first became aware of the SEQ around 2008. This was about the time of the migration point of V3 to V4 and the Wilba design. I finally
Hi All,
I just finished my Midiphy build and just wanted to share my experience with building this box to you.
- Building is quite easy, i did my build in around 18 hours with a lot of testing etc. between.
- Soldering the SMD parts i did with 0.5 tin and i really recommend using a flux pen for the IC's . It makes the soldering so much cleaner. For the soldering of the IC's i used a Gullwing tip on my iron after looking at this video ( https://www.youtube.com/watch?v=oKHsfTH_PvI )