latigid on

Out-of-stock parts for midiphy BOM tool

36 posts in this topic

ah! hmm.... not sure what happened ...
but somehow Mouser put the 25 pack No. 595-MC3486NE4 in my cart after I imported the BOM from the midiphy page and I didn't question it sufficiently.
or maybe that was the previous BOM part No. before you changed it??

anyways, not a biggy, my purchasing skills are a bit rusty after some break from DIY

 

Edited by gbrandt

Share this post


Link to post
Share on other sites

I updated the midiphy BOM tool to reflect the "single quantity" Mouser item. I think this wasn't the case before (as I've ordered single quantities using the same part/link), so my bet is Mouser "updated" that part to require MOQ 25. Did you ask them if you can return them for a refund or credit?

Once again, sorry for the trouble! You could have a whole studio of equipment with your Cores in one corner and the control surfaces in another :).

 

Share this post


Link to post
Share on other sites

that's actually a good point ... i might indeed be interested in peripherals like 8x AOUT_NG so i think i'll keep them for now ;-)

 

Share this post


Link to post
Share on other sites

Hi everyone,

First post here, oh my :) After a few months of saving, I just bought a SEQ V4+ on the awesome Midiphy Shop, and can't wait to get my hands on it. It looks like the sequencer I've been searching for a long time! The Midibox community is so interesting and impelling to me, thanks everyone who in some way or another has contributed to the SEQ project.

So I ordered all the components from Mouser for the V4+, and I just got an email announcing that a few parts were out of stock. Here's the list:

1 • CR1206-JW-103ELF (10K resistors)

2 • 3FTH9 (MEC switches)

3 • 1S11-19.0 (MEC switch caps)

4 • CR1206-JW-561ELF (560ohm thick film resistor)

 

I found 1, 2 and 3 on Digikey and RS-components (I'm located in France), here are the links while I'm at it and if that can help:

Digikey: 1, 2, 3

RS-components: 1, 2, 3

 

Digikey seems like the best option since you can order in single quantities.

 

It was quite easy to find the missing components apart from number 4, which is out of stock everywhere. So, sorry if that's a silly question, but I was wondering if anyone could help to find some alternate component that would replace CR1206-JW-561ELF? Preferably on Digikey, since all other missing pieces are available there, but somewhere else would be fine too.

 

Thanks!

 

Share this post


Link to post
Share on other sites

Welcome! Thanks for your parts suggestions. You may also like to check Reichelt and Conrad for the MEC parts, if they offer cheap enough shipping to France?

The 560R is not a crucial value, and in fact could be made as a 500R resistor by stacking 2x 1k resistors on top of each other. 470R should also be okay.

Best of luck with your SEQ v4+ build!

1 person likes this

Share this post


Link to post
Share on other sites

hi,

Reichelt runs also reichelt.fr, it can be used here in France no problem and cheaper than Digikey for small orders.

for the 560 ohm resistor i replaced the 1206 with a standing small form factor THT. 

1 person likes this

Share this post


Link to post
Share on other sites

Thank you latigid on and gbrandt for your answers! Sorry about that, I'm a complete newbie and a bit afraid to order the wrong part, so just to be sure, could you give me a link of a specific component that could replace CR1206-JW-561ELF? I couldn't find a 500 or 470ohm CR1206 on Mouser, just 430 or 510. 

Is this one ok? Or that one? They're not the same dimensions as the Bourn's, which is why I'm asking…

And I'll check Reichelt for sure!

Thanks

Edited by gotkovsky

Share this post


Link to post
Share on other sites

You just need to search for „1206“ and „560R“ and you will find a great selection at Mouser and Digikey available. Your first Reichelt link in your last post is also completely ok. Tolerance doesn‘t have to be better than 5%. Your second link to Reichelt is a resistor with 0.1% tolerance: Unnecessary expensive.

Edited by CJ55

Share this post


Link to post
Share on other sites

Here's the cheapest 560R 5% one on Mouser:

71-CRCW1206560RJNEB

We use thick-film, 5% ones, because the value and Tc is not so crucial.

Share this post


Link to post
Share on other sites

Ok, thank you CJ55 and latigid on for your precise answers!

Share this post


Link to post
Share on other sites

Posted (edited)

Found a really cheap source for the 19mm transparent Multimec caps / 1S11-19.0:

https://ie.farnell.com/multimec/1s11-19/cap-19mm/dp/1132952

35 pcs = €13.00 Including VAT

Plenty of Stock, and free Shipping to the UK and Ireland, not sure about other European countries. 

RS Online would have cost me  €41.38 with delivery for 40, (multiples of 10)


Found them via https://componentsearchengine.com/ , which figured out that farnell had the .0 missing from the part number, never trust google alone!

Edited by Smithy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now