First Project new member questions

[Guest VILLADON]

I'm starting a first project, and I want to make a dedicated controller for Ableton Live. I use this program for my DJ sets. Here is a descriptive layout for the Faders/Pots & Buttons:

[table][tr][td]Track Faders[/td][td]09[/td][td]     [/td][td]Track Select Buttons[/td][td]11[/td][/tr][tr][td]Send Faders[/td][td]02[/td][td]     [/td][td]Clip Playback Buttons[/td][td]48[/td][/tr][tr][td]X Fader[/td][td]01[/td][td]     [/td][td]Clip Stop Buttons[/td][td]09[/td][/tr][tr][td]Send1 & Send2 Pots[/td][td]20[/td][td]     [/td][td]Mute Buttons[/td][td]10[/td][/tr][tr][td]Pan Pots[/td][td]11[/td][td]     [/td][td]Solo Buttons[/td][td]10[/td][/tr][tr][td]Headphone Vol Pot[/td][td]01[/td][td]     [/td][td]Headphone Monitor Buttons[/td][td]08[/td][/tr][tr][td]Tempo +/- Pot[/td][td]01[/td][td]     [/td][td]Record Arming Buttons[/td][td]08[/td][/tr][tr][td]Effect On/Off Pots[/td][td]48[/td][td]     [/td][td]A/B Monitor Buttons[/td][td]20[/td][/tr][tr][td][/td][td]__[/td][td]     [/td][td]Play Button[/td][td]01[/td][/tr][tr][td]Total Pots/Faders[/td][td]93[/td][td]     [/td][td]Record Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Stop Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Tap Tempo Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td][/td][td]__[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Total Buttons[/td][td]128[/td][/tr][/table]

Can anyone tell me if it is possible to connect this amount of Pots/Faders and Buttons. For my first project i prefer not to use two core cards but if that is the only way I will.  I've been following the forum for a couple of days and i get quite confused on the amount of AIN mods , DIN Mods and  DOUT Mods you can connect to one core card.  any advise would be great.  Thanks for such a great forum!!

[Guest VILLADON]

I'm starting a first project, and I want to make a dedicated controller for Ableton Live. I use this program for my DJ sets. Here is a descriptive layout for the Faders/Pots & Buttons:

[table][tr][td]Track Faders[/td][td]09[/td][td]     [/td][td]Track Select Buttons[/td][td]11[/td][/tr][tr][td]Send Faders[/td][td]02[/td][td]     [/td][td]Clip Playback Buttons[/td][td]48[/td][/tr][tr][td]X Fader[/td][td]01[/td][td]     [/td][td]Clip Stop Buttons[/td][td]09[/td][/tr][tr][td]Send1 & Send2 Pots[/td][td]20[/td][td]     [/td][td]Mute Buttons[/td][td]10[/td][/tr][tr][td]Pan Pots[/td][td]11[/td][td]     [/td][td]Solo Buttons[/td][td]10[/td][/tr][tr][td]Headphone Vol Pot[/td][td]01[/td][td]     [/td][td]Headphone Monitor Buttons[/td][td]08[/td][/tr][tr][td]Tempo +/- Pot[/td][td]01[/td][td]     [/td][td]Record Arming Buttons[/td][td]08[/td][/tr][tr][td]Effect On/Off Pots[/td][td]48[/td][td]     [/td][td]A/B Monitor Buttons[/td][td]20[/td][/tr][tr][td][/td][td]__[/td][td]     [/td][td]Play Button[/td][td]01[/td][/tr][tr][td]Total Pots/Faders[/td][td]93[/td][td]     [/td][td]Record Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Stop Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Tap Tempo Button[/td][td]01[/td][/tr][tr][td][/td][td][/td][td]     [/td][td][/td][td]__[/td][/tr][tr][td][/td][td][/td][td]     [/td][td]Total Buttons[/td][td]128[/td][/tr][/table]

Can anyone tell me if it is possible to connect this amount of Pots/Faders and Buttons. For my first project i prefer not to use two core cards but if that is the only way I will.  I've been following the forum for a couple of days and i get quite confused on the amount of AIN mods , DIN Mods and  DOUT Mods you can connect to one core card.  any advise would be great.  Thanks for such a great forum!!

[Guest psytron]

looks loke you will need 2 cores to me.

only 64 pots/faders per core.

[Guest psytron]

looks loke you will need 2 cores to me.

only 64 pots/faders per core.

[DrBunsen]

Unless you make some of them encoders, and use the MIDIbox 64e firmware:

optionally up to 64 pots or up to 8 motorfaders can be connected in addition to the rotary encoders

MIDIbox64e