DIN Sync CV/Gate/Trigger with MIDIbox SEQ V4 Lite

[stahl]

Heya!

I was wondering if it is possible to have DIN sync clock out or even (one) CV/Trigger/Gate per sequence with the seq v4 lite.

On the project page it is stated "working, but configuration is too difficult, therefore not documented."

From how I understand, DIN sync can be achieved via a DOUT sihft register with 5V logic levels in the stm32f4 core.

I assume the complication in the v4 lite project comes from the fact, that there is no display and thus no way to configure/set the clock/start/stop signals?

Maybe someone can shed a light on how it could be achieved? I'm happy to change the software to make it work if that is necessary but would need some hints.

Best regards, stahl