soudan Posted April 15, 2005 Report Share Posted April 15, 2005 how do i go about testing the sid module with the c64 psu? Quote Link to comment Share on other sites More sharing options...
jdutcher Posted April 15, 2005 Report Share Posted April 15, 2005 you need to browse the ucapps.de site a bit more...it's all there, really.there are explicit directions found on the sid module page. take a look here: http://www.ucapps.de/mbhp/mbhp_sid_c64_psu.pdf Quote Link to comment Share on other sites More sharing options...
soudan Posted April 15, 2005 Author Report Share Posted April 15, 2005 yea ive seen that...thought there might be another way of just hooking the sid module up..oh wellthanksSean Quote Link to comment Share on other sites More sharing options...
jdutcher Posted April 15, 2005 Report Share Posted April 15, 2005 oh ok, i think i see what you mean now. as far as i know, all you can do with only a sid module is test the voltages coming from certain pins (per the instructions at the bottom of the sid module page). other than that, i don't think you can do much without a core module. Quote Link to comment Share on other sites More sharing options...
soudan Posted April 15, 2005 Author Report Share Posted April 15, 2005 ok i figured so but just wanted to make sure...i had to reorder my core module because a couple of the contacts on the board must have melted off or something probably because my soldering iron was too hot..but i had the core working after a bit i just want to test the sid module..oh well have to wait the coreSean Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.