Velaskin Posted May 9, 2006 Report Posted May 9, 2006 hi there,... this might be a stupid question. But I didn't find anything about it so far...I know, that it's possible to work with multiple layers for buttons/encoders, so that you can have multiple functions on one button/encoder by switching the layer.As far as I understood it, these layers work for the whole button/encoder layout, right? So, if you switch the layer, the whole panel switches.What I would need, would be a way to have multiple independant layers for certain areas of the panel.In (hopefully) better words:Let's say, you have 8 buttons with two layers. And then you have another 8 buttons with two layers. Is it possible to switch layers independantly for those two button-groups?cheers,John Quote
stryd_one Posted May 9, 2006 Report Posted May 9, 2006 Yes. You can make the buttons do whatever you want, so long as you are prepared to modify the firmware :) Quote
Velaskin Posted May 10, 2006 Author Report Posted May 10, 2006 ah ok. So basically it's like I understood it.Anything else can be done "by hand" ;D Quote
moebius Posted May 10, 2006 Report Posted May 10, 2006 Would it be sufficient to define multiple banks in a such way that only part of the encoder/ button are changed and other parts are similar to the other bank?Moebius Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.