xcoulonx Posted June 26, 2006 Report Posted June 26, 2006 Hello MidiboxeurJe n'arrive pas à configurer correctement mon datawheel pour une MB64, J'ai fait les modifs dans le main.asm, connecté l'encodeur sur pin 4 et 5 (la place de l'ancien snapshot et left), Mais je vois pas trop quoi faire avec le mios_table.inc. Quelqu'un a une idée. Un big merciFab Quote
moxi Posted June 26, 2006 Report Posted June 26, 2006 ton fichier mios table doit ressembler à ça si tu n'as qu'un encodeur et que ton encodeur est sur le 1er SR,pin 4 et 5":MIOS_ENC_PIN_TABLE ;; encoders 1-16 ;; SR Pin Mode ENC_ENTRY 1, 4, MIOS_ENC_MODE_NON_DETENTED ; V-Pot 1 ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT ENC_EOT Quote
xcoulonx Posted July 1, 2006 Author Report Posted July 1, 2006 Ok merci, j'avais fais ça mais avec un encodeur "detented". du coup impossible d'acceder à certaine fonction. je vais essayer avec un "non detented". Quote
moxi Posted July 1, 2006 Report Posted July 1, 2006 OUPS,j'avais pas fait gaffe, normalement ta datawheel doit être "detended" , c'est toi qui a raison... Quote
moxi Posted July 1, 2006 Report Posted July 1, 2006 ... si tu as mis un encodeur "detended" (qui tourne avec des "crans")..c'est quoi tes encodeurs? Quote
xcoulonx Posted July 3, 2006 Author Report Posted July 3, 2006 c'est ceux de Smash TV, avec poussoir intégré. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.