Problem with Core Oscilator

[dietmar]

Hi all,

I'm working on a midibox LC. My problem is the Core module.

I've loaded the Mackie emulation program to the PIC with a pic

programmer but I can't get the 10Mhz Oscilator working.

All voltages at the PIC are correct.

What can I do?

regards Dietmar

[moxi]

hi,

are you sure that the problem come from the crystal?

you say:

I've loaded the Mackie emulation program to the PIC with a pic

programmer

but you don't have to use a pic programmer to upload the MIOS and the app, you only need a pic programmer to burn the "bootstrap loader", then you can upload first the MIOS thru a standard MIDI interface, and one time the MIOS is correctly uploaded ,you have to upload the MIDIbox LC application via MIDI too..

[dietmar]

I've burned the LC emulation for mackie control and nothing else.

Do I need the bootstrap loader? I thought that the LC emulation

is a complete softwarepackage and it don't need anything else.

I'm testing the core module in a Lab, but I don't have a PC with

midi interface here, so I burned the software via PIC programmer.

[moxi]

do you use a pre-burned PIC from Smash-tv shop or Mike's SHOP?

you can't burn the app with a burner, only thru MIDI.

So, the steps are:

1. if you use a blank new PIC, download the bootstrap loader on Ucapps.

Burn it with your pic programmer.

if you use a pre-burned Pic, go to step 2

2.one time the bootstrap is burned , upload the MIOS via MIDI

3. now you can upload the app, via MIDI too.

but maybe, if you are using a pre-burned PIC, the bootstrap loader have been overwritten when you burn the app with your burner, check if you get the right request in your MIDI monitor...

[HL-SDK]

You build your own board, or using a kit/someone's design?

[DavidBanner]

sounds like you need to go back and do some reading!

[doc]

I thought that the LC emulation

is a complete softwarepackage and it don't need anything else.

You're right. The LC emulation is a complete application for MIOS ... not for the PIC.

In other words: First load the operationg system (MIOS), then the application (LC)

greets

Doc

[doc]

man, you're double posting ....

see your other thread for the answer.

greets

Doc

[smashtv]

man, you're double posting ....

see your other thread for the answer.

greets

Doc

Double posting=bad....I merged the two threads here.  ;)

[doc]

Thank you smash!

greets

Doc