John Hetmond Posted November 9, 2006 Report Share Posted November 9, 2006 Hi. I've bought all parts at Mike's Shop and already put all things together but ... there is some problem.I'm testing connection with computer and i can see (using the MIOS studio)00000000713225 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000715117 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000717009 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000718902 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000720794 ms | Sysex message: F0 00 00 7E 40 00 01 F7 00000000722686 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000724578 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000726470 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000728363 ms | Sysex message: F0 00 00 7E 40 00 01 F7 00000000730255 ms | Sysex message: F0 00 00 7E 40 00 01 F700000000732147 ms | Sysex message: F0 00 00 7E 40 00 01 F7....Nothing else , even if i will push one mouned button in teh DINXI'm testing this with one DINX connected to CORE . In DINX i've istalled only one button. In what is the problem ? PIC have been programmed in shop so i think that's not the point i think...Or meaby i have to upload a Mios ? If i have to Core's in my project i have to upload the Mios to them at once ?I will be gratefull if you will told me whati have to do , as soon as possible.Best regardsJohn Hetmond Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 9, 2006 Report Share Posted November 9, 2006 Welcome aboard Johnhttp://www.midibox.org/dokuwiki/doku.php?id=mios You've just got the bootloader on there at the moment. Check out that page and have a search around these forums as well and you'll be all set :) Quote Link to comment Share on other sites More sharing options...
John Hetmond Posted November 9, 2006 Author Report Share Posted November 9, 2006 Thanks ! I've already upload "update_without_installed_mios.hex" and now everything is fine i think...But when i press the button in the connected DINX module - there is no signal found by teh MIOS Studio or Ableton...What more i have to do to see that my Core is sending signals when i move pots or push the buttons?I've read this forum and uccaps and i can't find the answer . Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 9, 2006 Report Share Posted November 9, 2006 Read some more mate :) Don't be discouraged, there's a lot to take in!You've bought the PIC with the bootloader burned on it, and you've uploaded the operating system (MIOS), but not an application :)What application did you plan on using? Quote Link to comment Share on other sites More sharing options...
John Hetmond Posted November 9, 2006 Author Report Share Posted November 9, 2006 oh! that's the way it goes ! I thought that i will be everything programmed ready to work that's why i thought it's all after step with MIOS.And i really thank you for telling me what is what = ] . Sometimes everybody needs a little push to move! Thanks once again ! Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 10, 2006 Report Share Posted November 10, 2006 Anytime dude, hope it works OK! Don't forget to send us all some pics and show off when you're done heheheh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.