mess Posted February 10, 2007 Report Share Posted February 10, 2007 Hi I want to use RD 7:4 and RC5:4 for controlling a dacsince RB is partially used for the CAN-interfaceare there any changes needed to MIOS for this?(since RD7:5 are normally used to control the LCD)thanks,Michaël Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 11, 2007 Report Share Posted February 11, 2007 Nah it's all good so long as the WE line isn't active, the LCD ignores the rest... The SRAM extension uses PORTD too, if you want an example. Quote Link to comment Share on other sites More sharing options...
mess Posted February 12, 2007 Author Report Share Posted February 12, 2007 Thx for your reply,I'm not going to connect an lcd to that core but I was worried thatthe port state would be changed by the lcd driverMy solution was to configure the core for a custom lcd driverwhile leaving this template empty..It works great in the meantime but I would like to take a look at the SRAM code :-)Michaël Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.