superdavies Posted March 2, 2007 Report Share Posted March 2, 2007 Hi everyoneI've just finished the building of my midibox. it is very simple: 1 core, 1 ain with 8 pots, 1 din with 10 buttons, a dout with 6 leds. I load into the pic the mios and the ain64_din128_dout128_v2_0.zip application also if I have less than 64/128/128 items. Ok, it works! It send midi message (test with miosstudio) and seems fine.My next step is to write down and appropiate application: I Think I have to use C language, but, i think maybe there's another way...I tryed serge midibox64 editor but, when I try to assign different event, I can't understand the way to put them in to the pic for return to me even after I shout off the midibox (I don't have banksticks!!!).The fact is that I need a simple controller to control software like b4 and the buttons now only send note on message, instead I want them to send other control message...How to do?Second question is how can I set the led? I know they work (because when I turn on the midibox, they flash ) but how can I assign them to features I want?Thank you very muchAndrea Quote Link to comment Share on other sites More sharing options...
bill Posted March 4, 2007 Report Share Posted March 4, 2007 Hello andrea, that's not a "full" answer but few points :If you only use 8pots, then you dont need a AIN, you can plug your pots directly to the core, and save a AIN board.To write your own app, the only other way than C is the ASM. I think it's wise to stick with C, unless your an expert programmer :)As it's name say by itself, "midibox64 editor" is a tool to be used with the midibox64, and i'm not sure that the midibox64 app is runing on your pic atm, right ?About your other questions, most answers are here : http://ucapps.de/mios_c.htmlBe sure to read the Programming Examples !! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.