c64 optimized psu design in eagle or vectorboard format ?

[mat_s]

Hi, i am trying to design a small pcb or vectorboard which would hold the c64 optimized psu, 2 banksticks and a DINx1 (or DINx2 if possible).

i downloaded the free eagle software and DIY Layout Creator, but i am having a difficult time trying to recreate the optimized psu from scratch.

maybe if someone would not mind to share their vector board or eagle design it would be really helpfull.

thanks :)

[ris8_allo_zen0]

Hello mat_s,

I'm planning to make a schematic for PSU and two banksticks... no DIN, sorry :(

and the board layout is quite unusual: it's triangular shaped, but it should be easy to place the components as you need.

Is it good the same for you?

A question for the others: is it possible to use the Bankstick connector (J4) to also carry power to the Core? The schematic lets me think so, but who knows...

[mat_s]

Yes, thanks, the psu would be really helpful! :)

[ris8_allo_zen0]

Here is the stuff!

Please double/triple/quadruple check the wirings... I take no responsibility if you see some smoke from what you built from this schematic!!

Best regards,

Enrico

psu_bs.zip

psu_bs.zip

[mat_s]

that's perfect, thanks enrico :)