dout default configuration

[superdavies]

Hi

I'm using a custom version of the app called ain64_din128_dout128_v2_0.zip written in C; I'm not very practical in the apps development but I only want to know what's the default configuration for the digital out of this app. because I Need that every single led connected to the board via the dout module will light up when the corresponding din will be pressed: is this the default config. or not? If not any suggestion to how (and where) I must modify the code?

Thank you!

Andrea

[midiboxxer]

Hi,

I´m not a programmer, but if I understand it right you have to modify the mios_tables.inc .

At the moment there are no events in (MT_EOT).

So have a look at this applicatin:

http://www.ucapps.de/mios/ain64_din128_dout128_v1_3.zip

In the mios_tables.inc for example you can read this:

;; 128 buttons and LEDs assigned to MIDI events "B0 00 <value>" to "B0 7F <value>"

;; 64 pots assigned to MIDI events "B1 00 <value>" to "B1 3F <value>"

MIOS_MPROC_EVENT_TABLE

;; entry 0x00-0x0f

MT_ENTRY 0xb0, 0x00

MT_ENTRY 0xb0, 0x01

MT_ENTRY 0xb0, 0x02

MT_ENTRY 0xb0, 0x03

MT_ENTRY 0xb0, 0x04

MT_ENTRY 0xb0, 0x05

MT_ENTRY 0xb0, 0x06

MT_ENTRY 0xb0, 0x07

MT_ENTRY 0xb0, 0x08

MT_ENTRY 0xb0, 0x09

MT_ENTRY 0xb0, 0x0a

MT_ENTRY 0xb0, 0x0b

MT_ENTRY 0xb0, 0x0c

MT_ENTRY 0xb0, 0x0d

MT_ENTRY 0xb0, 0x0e

MT_ENTRY 0xb0, 0x0f

If I´m right, this is what you need.

See also:

http://www.ucapps.de/mios/mios_din_dout_pin_numbers.txt

Here are the din dout nummbers, you´ll need.

Hope that`s all true.

Greetings

Markus