wicked-E Posted November 3, 2007 Report Share Posted November 3, 2007 HihoIn the last days i´ve build a small midi-controller based on a core-modul with pic 18xx, and a din-modul with 16 rotary-encoder (from voti).Connectect J1 of the din to J6 of the core (...like explained at the mb 16e din description)Everything works fine, Vss and ground are aviable as they should be, (checked with a multimeter like anounced at ucapps), and i´m well able to upload something by mios.But here are my end of the "easy going" :'(I´m not able to assume wich hex files I should upload, tryed the main.asf und the mb16e.asf found in a zip-file called "midibox64(e)".Works, but I´m unfortunately unable to use the mb examply in reason to controll the Potis and so on ´cause midi-learn doesn´t take any effect.Can somebody explain or show me a link where i can find what I have finally to do so that my mb will work?!? Kind regards... Quote Link to comment Share on other sites More sharing options...
midiboxxer Posted November 3, 2007 Report Share Posted November 3, 2007 Hi,you´re on the right way, can you see the incomming midi events with midi-ox?If yes, which version of reason do you use?Have you checked the reason midi settings?Greetings Quote Link to comment Share on other sites More sharing options...
wicked-E Posted November 3, 2007 Author Report Share Posted November 3, 2007 can you see the incomming midi events with midi-ox?It seems that nothing will be send, means no incomming midi events.After "reset" of the mb appear this messages:TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT 00004579 Del -- F0 Buffer: 8 Bytes System Exclusive 0000477F Del -- F0 Buffer: 8 Bytes System Exclusive 00004EE6 Del -- D0 1A -- 1 --- Channel Aft after that, nothing else, what ever I do.So i think my problem must a fault or inclomplete code-upload.Can somewhere found a prog for testing if everything right installed!? Quote Link to comment Share on other sites More sharing options...
wicked-E Posted November 3, 2007 Author Report Share Posted November 3, 2007 Connect a LCD Display in the meantime -works fine and i love the "blue" ;DHope that I´m able to find some more specific details when upload but get no further than"Mios V 1.9f TK..."than...Int.1 [][][][][][][][]1|CC# 7 [127] []Got no incoming midi-messages by any encoder.I connect the din-board for testing to J9 of the core, and realy -one encoder of the 16 works fine so I space out a wiring error.Can me somebody get a hint what to do please!?.... Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 4, 2007 Report Share Posted November 4, 2007 Have you tried the SR interconnection test app? Quote Link to comment Share on other sites More sharing options...
wicked-E Posted November 5, 2007 Author Report Share Posted November 5, 2007 Have you tried the SR interconnection test app?Yes, and it works, the encoder-speed-test also passed....think I´m getin´ closer to full access -write on the ap at the moment.Some special hints?!? :) Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 7, 2007 Report Share Posted November 7, 2007 Uhm I just thought ahhh..... MB16e, is that even a MIOS app? Where did you download it, I can't find it hahah Quote Link to comment Share on other sites More sharing options...
midiboxxer Posted November 7, 2007 Report Share Posted November 7, 2007 Download the midibox 64e application, there you can find the 16e. ;) Quote Link to comment Share on other sites More sharing options...
wicked-E Posted November 10, 2007 Author Report Share Posted November 10, 2007 Take some modifications to the mb64 code and it works.Not 100% like I want it yet, (SR 3 + 4 doesn´t do what I "say" *smile*), but the rest works fine!Got a minimal mb with LCD, 4 buttons and 6 encoders working, the rest seems to be only change the mb-code at a few points.I´ve learnt so much about "programming" a mb since the last days , thanks a lot ...I´ll keep u updated ;D Quote Link to comment Share on other sites More sharing options...
wicked-E Posted November 16, 2007 Author Report Share Posted November 16, 2007 Works fine now, after "understanding" what code line works for what everything´s so mutch easier.Current Setup: LCD, BS, 24 Encoder, 12 Buttons.As u know it´s really easy to build additional modules if u got a "ground-setup" working so maybe my next post will show the (momentary) end-result if u r interessted ;D Quote Link to comment Share on other sites More sharing options...
midiboxxer Posted November 16, 2007 Report Share Posted November 16, 2007 Good to hear and hope to see your result next time! ;D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.