scottsober
-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by scottsober
-
-
I want the knobs and encoders also ....----scottsober pm me ...thanks
-
I am interested in the 6582a chips I pm you
-
Hi I have for sale 4 mos6582a chips new old stock for sale. 40 usdollars apiece 160us dollars for 4 I have PayPal. CHIPS ARE ALL SOLD
-
to clarify name it is all 1 word scottsober
-
NOW ALL CHIPS SOLD
-
Hi I am selling 8 tested 8580 Sid chips that are extras, the filters are tested and function well on all three channels new old stock chips. 300 US dollars + ship from n.y. now all sold
Repeat NOW ALL CHIPS SOLD
-
Sorry, and I now your not amazon that package is probably lost someplace , because I have gotten all my other forum purchases from Germany and abroad anyhow.We will solve the riddle, and I will resend the shipping money.And take it easy, no hurry, do this at your own pace .Have a good day/night there fantom xr....----regards scotty. scottsober5-28-2018
-
On 3/1/2018 at 10:31 PM, scottsober said:
Hello,
I am in n.y usa I would want 2 lpc17 boards and the encoder board unassembled.I have PayPal , how much to ship and for these?please pm me scottsober
I still have not received the order a reminder I ordered a lpc17 and encoder board I will pay you for shipping if you could resend some boards all other orders made it to me from Germany ,so I don't know what happened to yours I need the PayPal and amount to pay for you to reship ok ? regards scottsober 5-27-2018
-
-
Hi I need your name for PayPal I will send the 22 euros when you reply with your name
-
Could you pm me with details for 1 board ....----thanks scottsober( pp address and euros / dollars ship to n.y. ? thanks)
-
On 3/9/2018 at 0:41 PM, Akcija said:On 3/9/2018 at 0:41 PM, Akcija said:
Hi Scott I have two SID 8580 chips, I can check the R later, one is tested and working fine, the other worked fine the last time I used it but I can still throw it in my Midibox SID to make sure it's working.
Hi I have PayPal private message me with your PayPal id please, and I will send my address and the money .Please send amount you would want for 2 chips and ship to n.y. usa and thank you again....----scottsober
-
Hello,
I am in n.y usa I would want 2 lpc17 boards and the encoder board unassembled.I have PayPal , how much to ship and for these?please pm me scottsober
-
If someone could sell me a lpc17 core board i am in ny have PayPal also wtb sids preferably 85805r chips am building a back up mb6582 to the one I already built. Thanks again scottsober 2-3-2018
-
Sorry can't buy all but would like to buy the lpc17 core pc board
-
I was looking at the sid firmware with the presets and other files .the 044 file had quite a few setup files for the mb6582 i used setup_mb6582 and presetsalso 8580_setup .Do I need more
files for my mb6582 it is functioning now? regards....scottsober 7-5-2016
-
I also wanted to know if i need to do anything with the mb6582_asm file or filter files. Which files do in need from the sid 044 download .so far all i used was the
sid_8580.hex and the mb6582_hex are these all that i need or do i need to download more?The presets are in there already.How can I get the demo bassline number
5 to play also? thanks again if you could get my mb up to speed....----scotty 6-25-2016 7:25 am n.y. time
-
Thanks alot latigid you solved my midibox problem it fired right up again ! ....----kind regards and have a nice day....---- scottsober
-
Hello to all that can help,
I took apart my mb6582 after it was operating 100% good.I reprogrammed the pic 4685 with studio 2 with id 0,1,2,3 and changed the jumper at core 0 to 0,1,2,3 and used 8580_sid.hex,for
each id in studio 2and got the pics from smash tv.Now the mb6582 does not respond at the control surface.I noticed 4 of the lcd display wires were out,so i reattached them .I guess
the screen says 002 l Pint Ld chn.1
1---l Lead Patch
I tried to fix it but could not any help would be great thanks again ....----scottsober 6-24-2016
-
I am new at my midibox mb6582 build.All was working well ,until I took it apart and re loaded the setup_8580 file into the core 0,1,2,3 4685 pics.Now i have a non
responsive mb6582.i used my midi cables that i origionally used.I am wondering if i am uploading setup_8580 and changing the jumper at core 0 to 1 , 2 , 3 respectively and changing the device id at the studio 2 page
is this correct?The presets say that they are getting stored but arent changed with the menu dial.The firmware is not loading or i am making a mistake.I had everything
operating great at one point.When i removed the cover 4 of the lcd wires came off.I resoldered them,after carefully checking order and display is displaying e002 pint ld chn.1 1---lLead patch.None of the encoders or buttons will comply or respond at the control surface.any help would be appreciated....----scottsober 6-24-2016
-
so then i would have to erase the bootloader and redo 1,2,3 pics and keep the device id for pic18f4685 (the first one)?I am not programming with midi devics e although i have a midi usb device with chord .Then i would use the midi after the boards were done in circuit programming then is this correct.What is the procedure shall i erase the bootloaders for pickit 2 then from all 4 and start all over again?thanks ....----scotty
-
Hello again ,
I was able to get the pickit 2 to load the bootloader into 4 of the 18f4685 it read sucessful programming.A question is the device id should be 0 for all bootloader chips (all 4).Is this correct?
I realize that when uploading the 8580 firmware that the jumpers need to be changed in the mb6582 circuit board.I was not sure if the pic bootloader device id needs to be changed . I
am confirming that the device id is 0 for all 4 pics for the bootloader device id when using the pickit 2 ,and then later on the device 0,1,2,3 need to be changed when the pc board jumpers
are changed inside the mb6582 for uploading the firmware for the 8580 sid 's hex firmware.Also what other file is the midi file for the bootloader? Is this just a different way of burning the bootloader in to the pic with midi?I used a pickit 2 ,so no midi file was needed.Should i have changed the device id i did not see a way to do this with a pickit 2 when burning the boot loader? Thanks for a really nice audio device i really like the mb6582 the inventors are audio, and code amazing people.....----thanks for help with pic questions I am still a begginner
but i built and sold a mb a while back....----scottsober 1-16-2016
-
Hello again ,
I was able to get the pickit 2 to load the bootloader into 4 of the 18f4685 it read sucessful programming.A question is the device id should be 0 for all bootloader chips (all 4).Is this correct?
I realize that when uploading the 8580 firmware that the jumpers need to be changed in the mb6582 circuit board.I was not sure if the pic bootloader device id needs to be changed . I
am confirming that the device id is 0 for all 4 pics for the bootloader device id when using the pickit 2 ,and then later on the device 0,1,2,3 need to be changed when the pc board jumpers
are changed inside the mb6582 for uploading the firmware for the 8580 sid 's hex firmware.Also what other file is the midi file for the bootloader? Is this just a different way of burning the bootloader in to the pic with midi?I used a pickit 2 ,so no midi file was needed.Should i have changed the device id i did not see a way to do this with a pickit 2 when burning the boot loader? Thanks for a really nice audio device i really like the mb6582 the inventors are audio, and code amazing people.....----thanks for help with pic questions I am still a begginner
but i built and sold a mb a while back....----scottsober 1-16-2016
-
sorry listing closed
scottsober
in MIDIbox SID
Posted
I am going to build an mb6582 . My question is if 8580 chips are treated the same as 6582a chips?what needs to be uploaded ?
I burned the pics with the firmware successfully with a pick it 2.what else needs uploading besides the mb6582 setup file?i have 8 6582a chips the other mb6582 units I built used 8580 what will I need to do differently with the 6582a chips?thanks for the help regards Scottsober