kelargo
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by kelargo
-
-
Instead of emulating Mackie Control or Mackie HUI protocols, is it possibly to have external communication by OSC? Just wondering...
Ardour can now controlled by Mackie but it can also be controlled by OSC.. So I was wondering about that.
Thanks.
-
got mine, thanks!
-
got mine. thanks. now to find some GM5 ICs. :)
-
Hi
Can the signals from GK 13 pin on a guitar be used as input signals to a CV synth?
here's a diagram of the cable I'm talking about - My link
From what I understand, the cable connector is originally used to go from a guitar into a Roland guitar synth, which would create a MIDI signal, to become a controller, to drive a synth.. But this connector has six analog signals for each string.. and I'm wondering why use MIDI, when a CV synth would possible be interesting?
just wondering. thanks.
-
How many encoders will this have? (Re: Control surface PCB for 16 encoders/LEDrings Bulk Order)
Thanks.
-
Hi
It's definitely not password protected (I know it is my server!)
What message are you getting? Most browsers will just try an anonymous ftp connection (if not try username: ftp and password: <your email address> )
Thanks
Phil
thanks for your help! I'm getting it now.
-
Hello,
I'm going through this wiki page on setting up an environment to build MIOS.
http://www.midibox.org/dokuwiki/doku.php?id=linux_mios32_toolchain_core
It says to get a pre-built MIOS32 Toolchain from this ftp site - ftp://ftp.lansystems.co.uk/pub/midibox
but that site seems to be password protected right now.. how does one get an account? or is it hosted someplace else?
thanks
-
Interesting. However I just looked at the PCM1725 data sheet via Mouser and it says it is not recommended for new designs. Stock up now I suppose...
Hi,
I see a similar notice on the TI website for the PCM1725
"Not Recommended for New Design (NRND)
Replaced By PCM1754 – The device has the SAME FUNCTIONALITY as the compared device, but is not pin-for-pin equivalent and may not be parametrically equivalent."
Anyways, thank you for this community. Still learning about all that is happening here.
-
I would like three please, thank you!
13 pin female to 2 female thru box
in Design Concepts
Posted
Yeah, the Roland US-20 is an off the shelf solution.
You might find this article informative also -
http://www.muc.de/~hm/music/us-20/
BTW, The signal on the 13 pins is not yet MIDI... :-)