[Box of older MIDIbox boards and parts - Enough for MIDI controller + (2) SIDs]

I have a bunch of MIDIbox boards and parts that I purchased around 2006.  All parts were bought from SmashTV.  I had bought enough to make 2 SID engines with an elaborate MIDI controller interface.  I also built a custom wood/plexiglass PCB mount which is included along with a bunch of schematic printouts

 

Below are images of everything. $60 for everything plus shipping based on your location.  I can give you my ebay name and business website for reference.

 

 

 

Included Parts:

 

Soldered:

CoreR4C (Bootstrap V1_2)

SID R3 (no SID chip)
DIN R3
DOUT R3

AIN R3

Unsoldered:

CoreR4C (no chip)

SID R3 (no chip)

(2) DIN R3
DOUT R3

Other:

MBHP LTC R2
LCD V002210 rev C
Bootstrap v1_1b(may not work)

(2) small memory chips

Parts:

(5) MIDI jacks (3 panel-mount, 2 surface-mount)

(10) encoders
(1) pot

(16) small buttons
(4) toggle switches
(1) knob cap
ribbon cable (LCD size)

header pins (male and female)

(20+) black cable connectors

Commodore Parts:
(1) original C64 power supply with separate connector pulled from original machine

(4)2200uf 16V caps

(4)470uf 50V caps
assorted components pulled from original C64 board

Misc:

(1) Wooden/Plastic assembled mount for testing boards (includes MIDI I/O, Power connector, switch, encoders) (2) Large PCB yellow blank sheets 

 

 

 

 

 

 

 

Partlist.pdf

[[S] Large collection of Midibox parts/custom mount]

Sure, I can ship to Germany. I would ship Fedex. Contact me via email or PM if you're interested.

I just found a big stack of schematics and instruction printouts I made when I originally got these parts. There's also specific info on the LCD and encoders in the papers. I'll include these with the MIDIbox parts.

[[S] Large collection of Midibox parts/custom mount]

I bought these parts a while back from SmashTV. Many of the kits are still sealed in the original bags. Unfortunately I don't have the time to invest in building a Midibox so I'm selling these. I'm hoping someone might be able to put to these to good use.

A complete list of the parts is the last image below.

When I bought these parts, I think it was enough to build two MIDIbox SID's with an extensive front panel interface.

Also included in this is a wood and plexiglass mount I built. It's easier to take a look at the photo to see what it is. There's also some miscellaneous parts like an LCD, parts pulled from a C64 and it's original powersupply.

I just took a look on AVIshowtech and calculated the midibox parts to come in at around $200 (not including the custom mount, additional components, and C64 powersupply). Since some aren't the latest rev, etc, I'm asking $125 for the midibox parts and mount + $15 shipping.

For the powersupply, along with parts pulled from a C64 and a stash of capacitors, I'm asking $20 + $15 shipping.

If you wanted both, I can combine the two with shipping and take a little off of the power supply.

I'm located in Southern California about 2 hours east of LA. If interested, contact me and we can go from there.