[SEQ CS board]

13 minutes ago, latigid on said:

Anybody is free to build a "V3-like" MB-SEQ using DOUT/DIN modules in serial chains. The Wilba board is a simplification that saves shift registers and wiring by arranging the LEDs/buttons/encoders on a CS, only wiring up in a matrix. There's no real functional difference between the two, just convenience and all-in-one builds are less error-prone. 

V3/V4 is really MIOS8 vs. MIOS32. 

If you want a SEQ you can:

1. Wire up your own front panel
2. Wait for smashTV boards to be in stock again
3. Wait for developments on a new SEQ/case (me/Adrian)

1. Cheapest? Most immediate. Lots of work and probably lots of mistakes
2. Just wait. Established and good value. No case option
3. New concept, might be a bit more expensive but an elegant solution. Timeline is six months or so.

Thanks for that, I'll keep an eye on your development.

[SEQ CS board]

There is indeed a great amount of information to assimilate. Some thing are a bit confusing, going back and forth between different pages, blogs and the wiki is quite a task. I keep coming back trying to work my head around where to start, where to get the pcb's and so on.

if anybody can help: i can't  work out if there is a harware diference between the seqV3 and V4? http://www.mikes-elektronikseite.de/mshop_deutsch/index.htm sells seqV3 but the Control surface pcb doesn't seem to be included.

Any hint would be very much appreciated 

cheers

Christian

[SEQ CS board]

I'm interested too but still sold out on the midibox shop.

[WTB: SEQ V4 CS PCB unpopulated]

On 10/01/2017 at 1:30 PM, before said:

Hi, I can only offer you a build SEQ V4 without a case. I tested it and it works.

Hi, did Lisa get in touch? I'm interested in a SEQ V4, tried on midibox shop but there sold out.

cheers

Christian