MidiSlave
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by MidiSlave
-
-
-
Hi,
I'll attempt to explain an issue i'm having. My apologies because it's difficult to explain.
This is what i've got going on.
Track A is being step-triggered & restarted by Track B, sending/listening to T&A Bus 1. wonderful.
Track B has note and scale parameter layers which is nicely quantising the chaos.
With the duplicate FX i'm sending Track A out of an output port and back to an available in port.
T&A Bus 2 listening on this Port & Channel. My goal is to step-trigger or restart Track C via T&A Bus 2
which works, I have Bass Drum on each step on Track C being step-triggered by T&A Bus 2.
The problem is that Track A is now being restarted by both T&A busses!
So to reiterate, I have T&A Bus 1 effectively feeding T&A Bus 2 but T&A Bus 2 is restarting or step-triggering T&A Bus 1.
THANK YOU for trying to read that.
I think it's a bug.
V4+.095
-
Hi,
It's me again.
I've got a couple feature requests. Firstly It may have been mentioned in the past but I long for the ability to route multiple keyboards/synths to different tracks and live rec simultaneously.
So dedicating controller 1 to a track. controller 2 to a track. etc. I guess like 4 Jam Busses. Basically multitrack recording.
Secondly, how about a Keytracker FX? Note number to CC/CV conversion.
Love your work!
-
Hi,
I'll attempt to explain an issue i'm having. My apologies because it's difficult to explain.
This is what i've got going on.
Track A is being step-triggered & restarted by Track B, sending/listening to T&A Bus 1. wonderful.
Track B has note and scale parameter layers which is nicely quantising the chaos.
With the duplicate FX i'm sending Track A out of an output port and back to an available in port.
T&A Bus 2 listening on this Port & Channel. My goal is to step-trigger or restart Track C via T&A Bus 2
which works, I have Bass Drum on each step on Track C being step-triggered by T&A Bus 2.
The problem is that Track A is now being restarted by both T&A busses!
So to reiterate, I have T&A Bus 1 effectively feeding T&A Bus 2 but T&A Bus 2 is restarting or step-triggering T&A Bus 1.
THANK YOU for trying to read that.
I think it's a bug.
V4+.095
-
On 06/07/2018 at 3:27 AM, goyousalukis said:
Hi,
Hopefully someone will chime in if I am wrong, but I don't think there is a way to send different notes to different channels within a single track. A couple of possible ideas would be a MidiBox NG (another STM core with MidiIO) that takes the drum track input, processes it, and then sends out different channels, or some kind of software solution that does it on your PC.
(Or another MBSeq dedicated just to the Digikat! :)
that's ok. I've got a retrokits rk-002 cable that can handle that stuff.
on another note.
I'm having trouble figuring out why all busses are restarting a drum sequence I have listening to bus 1 in normal mode with restart on.
I have a note track restarting the drum track with various rhythms. My aim was to have another note track sending to another bus to step trigger a melodic sequence listening to that bus.
The notes from this second bus-sending track is restarting the drum track thats listening to bus 1 regardless what channel/bus is selected. I've disable any midi router nodes.
The melodic sequence is being step triggered by the second bus rhythm as intended.
Is this a bug? am I misunderstanding something?
-
Hi everyone, since updating to midibox seq v4+.095 the behaviour of the up and down button has changed to per step instead of per page as it was previously. How does one change this? I cant find any information about the up and down button behaviour.
I appreciate your help :)
-
Does anyone know if it's possible to set the voices of a drum track to different midi channels?
I have a Digitakt that has audio tracks on seperate midi channels.
-
10 hours ago, u-link said:
What have you set it to?
I was mistaken in thinking live forwarded notes from midi in would be effected by Duplicate FX
-
Also I am unable to morph drum tracks. Can someone please confirm if this is a bug?
loving this sequencer just a bit stuck on this,
-
On 08/05/2018 at 11:13 AM, u-link said:
Hi, I think I found a bug. I am on V4+.095 with the STM32F4 core. The "Duplicate FX" only works if the receiving channel is different to the one the track is set to. This would make sense if it is set to the same port, but not if set to a different port. So my track is outputting on Out 3, channel 2, I want to duplicate to Out 1, channel 2. Doesn't work, only if i set the duplicate destination to 1, 3, 4 etc.
I actually want to use the Duplicate FX to send CC feedback to a NG controller with 2 LRE8x2, so obviously the controller receives on the same channel as it sends. Is there a smarter way to achieve this? Like this you still need to configure anew for each pattern (or make a Preset for each one).
Edit: If you set "Additional Channels" to more than 1, the channel with the same number is included, too, but obviously the next one too.
The "Duplicate FX" no longer works for me sending to any channel.
Is there something that I could have done to mess it up?
-
For some reason the duplicate FX is no longer working. Is anyone able to help?
many thanks.
-
@sloI'm not sure thats what I'm after as the shadow out is for the selected track only. Now I cant remember how I got it working the other day. It would be cool if the buses were available as a duplicate FX destination
-
anyone got the NRPN list for the robotizer effect?
-
I'm loving my newly acquired seq. Question. Does anyone know if its possible to have a track sending to a T&A bus and also to a selected output?
So that I could have a drum part playing on track 1 out port 1 for instance but also sending to another track/T&A
Sorry if this was the wrong thread to post in.
------------------
SOLVED- I was on the right track with duplicate FX and physical loopback. Jam bus wasn't assigned correctly.
-
I'd set the msb no. incorrectly on my controller of course. nevermind
-
I have recently acquired a Midibox seq v4 from another member here. And it's incredible! I've managed to customise the F1-F4 buttons and the button behaviour of others to my liking.
I've mapped the morph CC on my Midi Controller.
I'm stuck trying to map a few other controls like the humanizer, robotizer. I've got the CC list from the beginners guide. I've tried assigning the corresponding CC's/NRPN on my midi controller.
Tried to set up a node in Midi Router to receive midi controller and send Selected Track.
What am I doing wrong here?
I have a drum machine in track 1 (port1 on channel 11)
Thanks for your help
-
I feel like this is the sequencer I need.
Unlikely to be able to build one myself, please sell me yours!
Postage to 4104 Australia
MIDIbox SEQ V4 Release + Feedback
in MIDIbox SEQ
Posted
Hey Everyone,
I'd love to be able to sequence the modes of the harmonic/melodic minor scale a little easier. Just as the modes of the major scale are numbered from cc12-18, it would be great if the modes of the melodic minor, harmonic minor or even harmonic major were listed consecutively. I'm often befuddled trying to find these scales in the scale list.
Harmonic Minor Modes:
Melodic Minor Modes:
Harmonic Major Modes:
Thoughts?
please and thank you! legends!