Jump to content

Synergic

Members
 View Profile  See their activity

  • Posts

    52

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by Synergic

  3. Led question

    in Testing/Troubleshooting

    Posted

    Heya!

    My usb module still doesn´t work..but is another history.

    I`m using a Native Instruments` program called Traktor for Dj mixing,but i have a problem.In this program ther is a button called Loop that seems to work in toggle mode,and in my midibox64 i have a button in toggle mode with a led.The problem is that it doesnt work properly,it fails sometimes.i have try with a button in on/off mode and it work fine..but i need a led to see when loop is active..do you understand? I want know if i can set a button to on/off mode and his led to toggle mode. is it posible? another suggestions?

    thanks!

  9. Crystalfontz LCD Question

    in Parts Questions

    Posted

    heya!

    "What I do see when the power is plugged in is blocks on row 1 and 3 (it's a 20x4 LCD)"

    That´s ok!  ;)

    "In the techsheet for the LCD it says that the max voltage for the backlight is 4,8, and the typical voltage for the BL is 4,5. I measure 5,12 "

    It must be ok.Is a little diference.Are you sure that the + and-  conections of BL are ok?Maybe are reversed?

    Or maybe that can help

    http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=troubleshooting;action=display;num=1061099622

  10. Usb and position of midi conectors

    in Testing/Troubleshooting

    Posted

    ...should be ok

    okis.

    please read again what I've wrote before about the MBHP_USB module in your last postings.

    • The upload of a MIDIbox bank doesn't work with MIDI-Ox, but with Serges SysEx loader, required upload rate: 100 bytes/s
    • The upload of MIOS code doesn't work with Serges SysEx loader, but with MIDI-Ox. The required settings can be found here: http://www.ucapps.de/mios_bootstrap.html

      Best Regards, Thorsten.

      FAQMARKER (so that I don't have to repeat myself every week... ;-) )
      I´m using serges Sysex loader at 100bytes/s.But it doesnt work.Excuse me for not explain it,my english is quite bad.Sorry and thanks.i´ll try slowest rate.

  11. Usb and position of midi conectors

    in Testing/Troubleshooting

    Posted

    Hi!

    Excuse me for being so heavy..but i´m having problems conecting core

    to usb module.i have pluged in optoacoupler of core,and conect male

    midi conector to j12 and j13 like say the schemattics.I conect

    midi out conector to usb module midi in socket and midi in conector

    to midi out socket...but it doesnt work...

    But..if i change the order of wires(2 to 4 and 4 to 2) it works. Is this ok?

    Another thing: if i sysex trought usb it happens the same thing like when i have incorrect software,midibox get loaded with an incorrect configuration,like corrupted.

    Any suggestions Thorsten?

    Thanks.

  12. Sigo por aquí

    in Español

    Posted

    hola.

    estoy deseperado

    me funcionaba genial con el puerto de juegos,pero hice el modulo usb y no cargaba midi..le llega corrompido o asi.

    pero ahora resulta q ocurre lo mismo con el puerto de juegos..le cargo conhiguraciones normales y me aparecen metaeventos y cosas q yo no meto...no se  q puede ser porque va directo al core y alli no he tocado nada...

    espero tu respuesta!

  13. really need help of electronics god

    in Testing/Troubleshooting

    Posted

    ok..this is amazing..now i cant sysex using gameport :'(

    It happens the same...seems to be sysex and all ok but...with corrupt data....now core seems to be wrong..

    It happens de same that occurs with usb module..and i have notice that midi data sending with pc comes to midi in ..but all is setting ok!! i dont know what to do!!

    i thinking about destroy all!!!

    please help!  i´m going crazy!!

  16. really need help of electronics god

    in Testing/Troubleshooting

    Posted

    Hi

    i have use midibox64.syx file but it happens de same thing.....it is very extrange..it looks like midibox receive the same data!!!

    i´m going to connect externally trought midi conectors...but....i dont known how to do it!! i have only three pins comming from core..and midi in conector use 2 and midi out conector use 3.....how do i do it??

  17. really need help of electronics god

    in Testing/Troubleshooting

    Posted

    Yes,i try it at 1oob/sec but nothing....

    Today i have tried a lot of settings but or nothing happens or my midibox get loaded with a wrong configuration(with a lot of metaevents,no toggle buttons....like now).

    I dont know what more do.A lot of times it seems to be ok..it says "Receiving sysex dump".....and after this,,"sysex dump complete"...but not with the correct data..i see....

    any solutions? maybe any component on usb module could be wrong and is doing some type of interference?

    thanks.

    More:

    i usb module is powered by usb conector.

    i have notice that if i only plug in usb cable(not midibox power),some leds have a little bright,the same who works when i turn on midibox....it looks like the core get power trought midi wires...is that ok?

    thanks again

  21. really need help of electronics god

    in Testing/Troubleshooting

    Posted

    ok,excuse me!!

    lets see!

    My midi box64  works fine with gameport,but i need use it with my handbook,so i have done usb module.

    ok,usb module is detected as usb audio device,fine!,and midi out of midibox goes perfectly trought usb(i can control my sequencer).

    But when i try to change midibox configuration(i.e.button mode.etc..)with Vmidibox,something extrange happens: in Lcd you can read "REceiving Sysex dump"..thats ok.....then "Sysex Dump complete"...ok too....but midibox get crazy!!...i will explain it,configuration that i send is that:pots mode normal,with diferents CCs,buttons from 1 to 18 in toggle mode,with differents CCs,midimerger off and navigation menu off.But after trying to sysex a new configuration,pots send metaevents,buttons send notes and navigation menu is active and some options name are missed.

    It looks that midi signal from pc comming trought usb arrives to midibox in wrong state....and midibox get like "freezed" and only can restore it with gameport cable and a lot of tries.

    Thaks all.

    I have connected core module to usb module: Mi to MO and viceversa and ground pin.Powered from usb.

    OPtoacouplers not stuffed.

    i hope someone can help me ,,and excuse me for my bad english and being too heavy!!

  23. really need help of electronics god

    in Testing/Troubleshooting

    Posted

    midibox send midi ok,but when i try to sysex...boom!!it says sysex complete but nidibox is totally disconfigured.

    ok..it take me a lot of time programing midibox with gameport,it looks to be "freezed" and doesnt response at the first..second..third..etc time.but then...it goes  ok and i can load sysex anytime.

    ok,i connect usb module ..Mi to Mo and viceversa.and  ground.ok.midibox send midi..but when i try to sysex,y seems to be ok,receiving complete....but surprise!!! metaevents loaded...and a lot of extrange configuratiom that i havent do!!! and blocked again!!! until i program with gameport(soldering again of course!!)

    what can i do? what is the problem?

  24. having serious problems with usb

    in Testing/Troubleshooting

    Posted

    ok..it take me a lot of time programing midibox with gameport,it looks to be "freezed" and doesnt response at the first..second..third..etc time.but then...it goes  ok and i can load sysex anytime.

    ok,i connect usb module ..Mi to Mo and viceversa.and  ground.ok.midibox send midi..but when i try to sysex,y seems to be ok,receiving complete....but surprise!!! metaevents loaded...and a lot of extrange configuratiom that i havent do!!! and blocked again!!! until i program with gameport(soldering again of course!!)

    what can i do? what is the problem?

×
×
  • Create New...