SounDuke
-
Posts
309 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by SounDuke
-
-
thank you TK!!
-
thanks everyone :D
Can you tilt the SID towards you or it is fixed to the keyboard?What kind of knobs are those? I think similar is used on some Roland groveboxes but white.
Can you please show how you cutted PCB looks like?
I tried to hook the keyboard to the synth after I shot these photos but the synth is heavier than the minikeyb ^^ I must put some sustain plexiglas cylinder on one side as soon as I have time ^^.
The knobs feeling is not very good, I took these at RS electronics because they were cheap, therefore not very robust too..
about the pcb, I'll edit this post with the images as soon as I go back to my home. Honour to W for the idea and for the cutting of the baseboard ^^
Cimo: grazie, the casio I used was sa-65 found on ebay, midiboxed thanks to qbas sm and vel driver (thank you very very much qbas).
-
Thank you all ^_^
I wretched a Casio and cutted the keyboard part, breadboarded a core and 1dindout for the mini keyb matrix. I use the same systems for doors to put the mbsid over the keyboard in korg ms20 style (not shown in the picture tho).
Nils: I think I'll put something more useful than a lfo display there ^_^ the panel design is 1 year old as V2 was released after I received the panel from schaeffer :(
-
Not an Aston Martin like the mb6582 which are being produced by everyone ^_^
there is a cutted mb6582 baseboard inside, and the white square hole will probably accomodate a xy pad or a Glcd with pic based oscilloscope.
Sorry for the photos, I have to dim these leds and throw away my mobile phone camera.
Thanks to all who made this possible, TK, Smash and Wilba and of course the community ;)
-
Hello Mat, please note that this function is implemented in the env section of the complete control surface when the CTRL button is toggled to Assign. you could add the 5 encoders and the CTRL button, so that they control both the env parameters and the on screen parameters. for the 4*20 display I'm not really sure as I have a 2x20 display.
-
I have no words.. like Indiana when he talks with his father in the dirigible.
Happy birthday TK! Awesome Mr. Stoeckl!
-
Ahoyhoy Gav!
I have some 3372, not had already the chance to test them to my sid (waiting for aoutng). Thanks for the link tho!
-
Ahoyhoy Alcoloic! I had your same problem yesterday as soon I stuffed my panel with the lcd.
the lcd had a different ground respect to the rest of the midibox, I'm 70% sure your problem lies in incorrect grounding, I solved the issue by connecting the din/dout chain ground to the chassis, so that the lcd and the DIN/DOUT had the same ground. check it!
-
Hello Julien,
I hardly reply in sales requests to avoid to feed the endless discussions TK very often dislikes. In your case I felt necessary to say my opinion though, because I frankly liked your activity inside the community and seeing this post shocked me a little bit.
Especially in your affermation "stop to be angry be creative", especially seeing you ask questions in the forum on how to implement lfo, valuable knowledge (in term of human collaboration and natural value, not economical value) to achieve personal profit.
There's no point in attacking you, I hope you'll interpret my post not as an attack, but as an occasion to think about how much you learned sticking to the spirit of the community until now and how much you can learn in the future! And how much we all can benefit for someone willing to learn like you. Money puts an abyssal shadow over all of these brilliant prospectives.
-
Including the bit where the Sink accused SD of filting with Optmus Prime?
I don't like your tone, reading these lines made me feel like when you're about to download something and a BANNER pops up.
I can prove that Optimus Prime isn't that good, well, he's good at sexual abuses.
;)
p.s.: this topic is a proof of what an idiot is capable of to reach 300 posts ^_^
-
A rumble came from the Defecation Lab. One of the most weird place, were sound traveled over a particular medium: shit.
The security camera recordings showed a postman entering the Defecation Lab with a package bought from ebay with the transformers logo on it, and never getting his way out from the marshmallow brown light emitting lab. (...)
"I'm back home!" I screamed with loud voice. The shit, with a sudden absorption, brought the message to a fairy creature, the owner of the lab, an EVIL SINK. A zap of energon struck my spine and I literally fell in the shit, which penetrated my ears and delivered the following message:
"YOU DAMN AUTOBOT BITCH! I, MEGATRON SINK, WILL PUNISH YOU FOR YOUR TRANSFORMATION FLIRT WITH OPTIMUS PRIME".
to be continued
anticipation: To defend himself from Megatron Sink, Sounduke transforms into a dildo thanks to the hard training superimposed by Optimus Prime in his seduction sessions.
-
During the session I noticed a lot of imperfections, which need to be solved :-/
Maybe something related to the display printing "GAS"?
KABOOM
er TK that explosion was that BD or you forgot to turn off the gas?
Cool drums TK!
-
REPORT TO MODERATOR
-
All sticks gone. Thank you
-
nopenope! sorry NLX, I had some health problems and I couldn't send the sticks, I'm sending them on the 20th of august, so Wisefire you are lucky ^_^. NLX, should I add 5 sticks to your box?
-
A talking sink
-
Hi MTE, I think it should fit but it'll be loose.. you should find knobs with female thread or with hole diametre a little bit inferior to 3mm.
@wilba: give your address to this wog by PMing him :D
-
2 sticks out! 18 remaining
-
the thread mates with standard 3mm screw, the base of the shaft resemble the wrench dimension of the M3 screw (5.5mm). It's the standard M3 thread.
-
http://www.alltronics.com/cgi-bin/item/93P004/search/Dual%2D5K%2Dpot%2DJoystick
selling these because I cannibalized other joysticks and don't need them anymore. I took them from alltronics (10kohm version not currently available on alltronics), 2 euros per pcs. 20 available
-
Hello, I found a broken Chroma Polaris (not serviceable ) and scavenged 6 cem3372 and 6 cem3374(is this VCO useable for other projects?). I read some posts about the difference between the 3378 and the above mentioned, but I'd like to know if someone has used these before to avoid frying these valuable chips acquiring valuable informations. I'd like to add the filters to my MB4xSIDV2. Thank you in advance
-
thank you smash!
-
Hello everyone, I can't find useful info about the 8580 audio output. Soemone owning a MBsid could tell me the DC voltage range of the audio output of the sid 8580. Thanks in advance
-
@QBAS I bought 4 TP/8SK 76 keys with Aftertouch. I went personally to fatar's factory to check the feel, the TP/8O (awww excellent design) is a little bit more weightd than the TP/8SK. Please note that "unweighted" refers to "semiweighted" as nearly all models have little leads weight inside the plastic white keys. The TP/8SK is an high end synthesizer keyboard which I use as an hybrid (organ and synthesizer) because of the very cool semiweighted action. I'm sure there are better nice feeling keyboard outta here, but as Qbas said the quality/price is awesome. Qbas's code too is very stable! (only minor adjustments to velocity curves are necessary)
Doepfer doesn't offer all the models which fatar produces, in addition to this the prices are lower but I'm not sure if they'll agree to organize by themselves an international shipping, so I'll ask them to do so if we reach almost 15-20 models. I'm quite sure that a big discount should be possible, but someone has to receive all the keyboards and send to other people as I can only ask to send the goods to one destination (depending upon the location of the buyers we could choose the nearest place to all buyers).
@Robin
The TP/9s is the "universal keyboard", in my opinion has a worst feel compared to the TP/8 series. I didn't ask the price of the TP/9, but I'm rather sure that is lower than 90 €. (I purchased my TP/8SK paying 95€ Tax included).
Feel free to ask for info
SwinSID Ultimate
in MIDIbox SID
Posted
I ordered 2 boards, as yogi said and the SSU developer confirmed pal and ntsc are not exactly 1Mhz while TK states that in mbsid the sid receives 1Mhz from Core::J7:SO/PIC Pin #17.
The sid will need tuning, but I'd rather tune all the other instruments to the sid instead :D
As soon as I receive them I will try them and let you know