toxictv101
-
Posts
68 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by toxictv101
-
-
hi
i ve looked everywhere in the prog (eagle)
but can't find a way to mix together 2 or more
different board
for exemple if i want to put 1core & 1sid on the same card
Tanks For Help.
ENjoy DIY Electronic
-
What transistors do you use, the originals 2SA733, 2SC945 or the
Halucinogen replacements (BC640, BC639)?
And what Op Amps?
Thanks
hi sebo
i used bc639/640 ((also for noise part)) and tl072 for opamp
everything work well
but i want to remake one my self and drawn everything
and put all the pot on the board with voice because its so boring to solder all wire
between pot and ci. >:( more than 200wire :o :'( (""i hate do that""))
i gona make one board with all voice on it
And a second board with seq,ctrl,...
-
ive my 4 voice808 (bd,sn,ma,clp)now finished
no one part was hard to find for me, i ve put the same transistor everywhere (npn,pnp ofcourse)
and its sound good.
ive just notice that all the hallucinogen mods
are not working perfectly , because some pots dont work on
100% some one are only active during 15% of the rotation.
would be maby great to redrawn all the schematics
and make it tcheked by some one That know well
The "TWIN-T filter :)
-
for now i was planning to just build 4 sounds modul
bass drum, snare,maracas & clap
with midio128 to trig it in midi, without velocity
i ve never think to build it with 4 output with different velocity on each
good idea :D
i ll do it later.
But i would like later build a complet tr808 with all sound, sequencer, 24ppqn sync etc ...
lot of work :p
i ll post sample of the 4sound808 when it s done , think will finish it tomorow
::) ::) ::) ::) ::) ::) ::) ::) ::) ::) ::) :P
-
yes
you re right , the answer was there !!!
just needed to replace a part of main code
USER_SR_Service_Finish
clrf MIOS_PARAMETER1
movlw 0x00
call MIOS_DOUT_SRSet
movlw 0x01
call MIOS_DOUT_SRSet
movlw 0x02
call MIOS_DOUT_SRSet
return
Perfect 1ms Pulse output , ;D YAhaaaaaaa!!!!!! :D
-
yes
for trig drum modul
-
everything work :D lalalala
-
hi,
i know that it's possible to get 1ms pulse from the output
of dout with the midio128 , i just can find how to :(
-
i dont know but, one time i ve Destroy a pic
and when i puted it into the core , Voltage falled Down,, dont know why
-
ok, sorry !
i m building a midi triger interface for a 808clone.
i ve simpify the more i can the core modul , so i ve remove lcd connector and all
route that was not needed, in fact i ve just keep the midi, and the dout.
i ve upload midio128 without problem now, the problem was that the upload have to be done under 2 sec.
now it s ok , but like all the time , i ve got a another probleme!!!
the crystal dont seem to oscillate anymore!!!
i supose that one of the 2 pin must be HIGH (5v) and the other Get the 10MHZ
But no one is HIGH, is it normal ???? maby is it i dont know
i tcheked all pin of the pic with oscillo, no one is moving, ((( Its not a hardware problem , because
with a another pic already programed for sid , the crystal oscillate and all pin Are dancing)))
so ..... ?????? i dont know ? if it s normal
-
i ve done the main board
i can say that the snare is amazing !!!!!
(now i m makin a midio128 to trig All That Sounds))
-
now i ve upload the mios well
byte was all well receive : ) : °
but now it wont receive the apps. i want to send midio128 inside
but it dont work :'(
maby i ve not convert midio well
-
ok i found it
it s well hiden
"perl hex2syx.pl mios_v1_x.hex -os_upload -device_id 0x01"
maby it would be nice to put this in the help procedure
because it been 5 day that i m on this probleme :pp
-
in fact i already try to convert the last mios puting the script hex2syx.pl
in the folder etcetc... but it doesnt work , impossible to convert
it say that the main. file need to be tcheked
is someone can send me the already converted , it would be amazing
Please help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
ok i dont knowed these channel
Tks!
-
i download the mios and bootstrap but
i can't find in the folders the perl script that convert it!!
can i take a hex2syx.pl anywhere else ?????
-
i created a new chat room For Ucappser
Join Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
find the part number on it
find the datasheet on google
but for me it look like a switch
-
hey ,
Can u say what u use for trig the sound ?
i mean witch module ?
what is your mb configuration and what are the requiere change to the prog.
Tks
-
so great!!!
can't wait to see the plan :o
it would be great to get more than 16 trig/Gate out to control also external fx, DrumSynth etc ...
if u can send me info on Galactikexplorer@hotmail.com
Tks ...
-
i would need a config. that alow a less 16 pulse output in 15volt
controled by a sequencer with synch24, din modul for step prog. etc ...
is anybody have a sugestions for this , it would be welcom ???
i m minding on this problem...
-
yheap
you re probably right!
i ll do like this finally
But i wanted to understand how work the famous TwinT Filter
and see it in work by my eyes ::)
i just hope that there is no error in his pcb
because without the schems it s not easy to understand
:p
but i think now , i would be able to do it with all the lecons of electronic that ive folow.
i ll finish this , and find a other think, maby for my end of study work.
...i ll send this 808x clone's picture here later
see you soon :) ...
-
hey
sorry for the time
What is exactly the probleme with your MidiBox ?
What Do not WorK ?
-
hi
i m also trying to make a clone of the 808
i want to build eatch sound separatly on a pcb like Hallu.
and build a sequencer. i gona use a R8c/13 µC From Rensas
actualy i ve done only the basscick pcb and the switch board
and i m working on the serial shiftregister, first time that i do a such complex
work.
i also simulate all sound modul with ElectronicWorkbench That is work pretty well for That
maby it would Be great to cooperate.
Eagles___is it possible to mix 2 board in 1?????????
in Design Concepts
Posted
of course without gnd and power ... ;D
tks