ptitjes

Hi, I have two sets of ALPS SRGPHJ3200 Jog Shuttle momentary (10 pulse/detent) + ALBS JSK5542-88 jog shuttle knob (2 pieces/black) I sell each set 7€ (shipping price and paypal taxes not included) Best regards, Didier.

Hi all, Some more spare parts... 108 Bourns PEC11 for 81€ (shipping and paypal taxes not included) Best regards, Didier.

I propose to sell them for 250€ the 24 RSAON11M9 touch-sensitive motorfaders with their chome cap. (and some additional black caps). This does not include shipping and paypal taxes. Best regards, Didier.

I propose a new deal: 2.90€ each for less than 50 switches (>8% rebate) 2.70€ each for 50 switches and more (>14% rebate) or 490€ for the whole lot of 196 switches (2.50€ each, >20% rebate) Best regards, Didier.

Sold!

Hi Protosx, Please check your private messages! Regards, Didier.

Hi Screaming Rabbit, Hope you are going well! I don't take it bad :p I don't know if you should say second hand when they were *even not put out* of their package. Should I say second hand anyway ? I had a good price for the quantity. Those kind of parts are quite expensive and I believe they still have their values as they were kept in good condition. I believe they value that price. If you think I'm wrong and you are interested, you can still propose for less. I'm open to negotiate but you must understand I hope to recover enough money. As you might have understand reading my last posts, I'm in some urge to dispose all of my electronic material for some serious personal reasons. So you know their original price, I made a proposal, just do what you believe is right to do. Maybe my limited vocabulary lead to this misunderstanding, which I can understand. However I never told this was a *great deal*, but I believe it is a good enough one. By the way, checking the packets, there only is 96 yellow switch (TP2161-Y) so feel free to propose a deal. I hope this post is not too fiery for the forum's policy. Best regards, Didier.

Hi, I'm still getting rid of stuff that clutters the garage... :p Among that there are these marvelous : 100 RJS TP2161-Y Illuminated Switches Yellow filter with White LED 100 RJS TP2162-R Illuminated Switches Red filter with Red LED Those are fully back-lighted 8mm x 8mm x 18.5mm switch with rubber contact and 1mm travel. They are really well designed as you have the switch pins available at both ends of the part. So you can trick over your LED lines on your PCBs. You can find the datasheet on the web page for that product: http://www.rjselectronics.com/?Switches_LED_Illuminated:Small:RJS_TP2161_Switches Note that the photos on the page and the datasheet are not well serving. Those parts are really beautiful. I had samples before choosing to buy them. I had them for 3.16€ each, so I'm OK to leave them for 300€ for 100. Shipping from Paris and payment through Paypal. Best regards, Didier.

Hi all, As said in my previous post, I've not posted for months here, and somehow leaved the community some years ago for personal reasons. I now live in the south of France completely out of any tech stuff. This is the reason why I also sell those never used : 56 black&red "Waldorf" knobs (863120 Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-rot) 56 black&white "Waldorf" knobs (863120 Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-weiß) I would leave them for 0.9€ each, or 80€ for the whole lot. That price does not included post taxes if any needed. They are currently near Paris. I can sell pots that I wanted to use with those. Also I've got two jog shuttles and their caps. Just ask! Best regards, Ptitjes.

Hi all, I've not posted for months here, and somehow leaved the community some years ago for personal reasons. I now live in the south of France completely out of any tech stuff. This is the reason why I sell: 24 RSAON11M9 touch-sensitive motorfaders with their chome cap. I got those for 13.17€ each so I'm ok to leave them for 12€ each, or 280€ for the whole lot. That price does not included post taxes if any needed. They are currently near Paris. Best regards, Ptitjes.

No there isn't... However, it seems to be a standard shape for shafts as Piher has exactly the same shape on their N15s and EWVYCs... But filtering for shafts in shops (mouser, farnell...) always give me lots of potentiometers. I'm having a hard job finding 6mm shafts with 4.5mm D end (for the waldorf knobs... :)) I already found : - 6mm diameter with 4.1mm D - 6mm diameter with 4.6mm D I don't think any of these will perfectly fit my knobs... Search is continuing! Best regards, Didier.

Do you have links for higher res encoders ? Mouser sells the ALPS RDC803001A at 1.82$. This is another 360° pot (two phase). My problem with the EWVYC and the RDC80 is that they don't have a shaft and I don't know where I could find shafts with their shape at end and D shaft at the other end. Practical suggestions are very welcome :)

OK, sorry! This is what I was thinking.

Hi Roger! Cool. I found the datasheet do not give complete information for product part numbers. Do you know where I could find more info. Also where I could buy these ? Thank you :) I don't think it would so hard... Any comment on this ? Continuous values obviously... Best regards, Didier.

Hello everyone! I was wondering if someone knows if there exists endless rotary pots. I mean rotary potentiometters with endless 360° mechanical rotation (no stopper). I would like to use those pots instead of encoders. I would use 16-bit ADCs and figure out a relative value change. By fetching quickly enough the ADCs I could figure out when the pot has been turn completely. I found this EWVYC pot from Panasonic. However they say "detent pitch 10° min (custom design available)" and I would like no detent at all. http://www.datasheetpro.com/535314_download_EWVYC_datasheet.html Thanks for your help. Best regards, Didier.