Zossen
-
Posts
216 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Zossen
-
-
hi
thx 4 answer
Midi connection are double and triple checked
and i haven't a burner yet (but i'm waiting for one)
so nothing i can do now ....
-
lol, was mna nicht alles hier findet
bei 39 Symbolen könntest du evt mit nem Motorfadermodul 39 Positionen auf dem "Fader/Motor" festlegen
und diese dann nacheinander aufrufen und dazu die entsprechenden leds aufleuchten lassen.
Aber wie schon erwähnt ohne ZPM oder nem Naquadria-Planeteten wird das nix mit der Verbindung :),
solltest du aber mit der Anwahl Erfolg haben <--- bitte unbedingt melden - würde gerne 9 Symbole anwählen und mich auf das Rauschiff begeben!!!
-
Hi,
Die großen Pulte von icon soielen aber in einer etwas anderen Preisliga !!
http://www.christianmaier.at/module/s__bilder/Image/ICON.jpg
Nachdem was ich aber inzwischen hier im Forum und Ucapps gelesen hab ist es durchaus möglich einen Ähnlichen Funktionsumfang mit
mehreren Midiboxen zu erreichen <- siehe LC Projekte
Gruß
Robert
aka Zossen
-
Hi
have a Problem with my Projekt
after a few tries of connecting a lot of stuff in my MidiMixer64 Projekt
i get only the Message "1 Note C2 0o" in the diplay
just the core without any DIN/DOUt/AIN connected to it.
In Mios i get no reaction and no midisignals from it :(
J15 grounded or not _ its still the same.
when i try to connect the core a few times -< after powering it up = than it reboots.
Have i killed the Chip ??
best regards Zossen
-
suche nur jemanden der das evt noch über hat ,
weil Mios8 reicht und evt hat jemand sich schon neuere Cores besorgt oder auf ein anderes projekt umgesattelt
aber danke für die Links (kennt man aber inzwischen schon :-) )
Bei Smash muss ich die Tage meine fehlenden 32 Encoder für den Mixer bestellen.
Lg Robert
-
Want to buy
2xCore (for 2x Midibox64)
4 DIN
4 AIN
16 Knobs Waldorf
-
Hi,
Falls du noch Interesse hast, verkaufe ich approval von TK vorrausgesetzt meinen SEQ V4 also Core32 + noch ein paar anderen Parts.
Dazu gehören ein Core 8 mit SEQ V3 drauf
2x 40x2 Displays( die normalen gelben)
1x GM5 das kleine PCB
1x Ethernet PCB plus PIC
Der fertige SEQ hat blaue Displays mit weißer Schrift.
Falls TK grünes Licht gibt geb ich dir die Preise raus.
Marco
Da mein ultracore nicht laufen will wäre mir ein fertiger Core ganz recht,
was soll mich den der Spaß kosten ?
Und hättest du wenn du aus Berlin bist mal Zeit mir mal kurz dabei zu helfen?
LG
Robert
-
SOLD ;-)
Hello,
Selling Core32 PCB,DIN PCB,DOUT PCB CORE32Kit alltogether in one package straight from SMASH TV unopened therefore unsoldered ;-) for 60€ (price for parts + half of the shipping costs from SMASH TV without the paid customs duty - 4€)+ shipping cost. I'am selling it as one package.
and
I'am selling 1 Core 8 Kit with a PIC18F4685 already soldered for 10€ + shipping cost.
Location is Berlin/Germany.
Greetz Boris
Sag ist da noch was von über ??
Bin auch aus Berlin und noch auf der Suche nach ein paar Teilen
LG
Zossen
-
22 Stück (+2 mit krummen Beinen) , von TI, aus Audiomischpult
alle zusammen 6,-€ inkl.Versand
-
Könntest du die Quelle nennen aus der die Aluminium Encoder stammen? Sind diese käuflich zu erwerben und hast du irgendwelche Infos oder stammen sie aus dem HIFI Verstärker den du ausgeschlachtet hast?
Der silberne Knopf mit dem Silberring sowie den Encodern dazu ist wirklich von dem Verstärker vor Ewigkeiten geschlachtet, nett das das noch jemand weis bzw findet.
Nachtrag zur ürsprünglichen Anfrage : Hat jemand noch 20 Potiknöpfe im Design der Behringer2000 oder der Waldorf Soft Knops oder ne Quelle dazu??
-
so stell ich mir die Alustücke vor
-
< hi, die pics kann ich dir brennen, für lau. >
nice, schick ich dir dann inkl Rückporto zu. Schick dir gleich mal ne PM. Kleines Dankeschön leg ich aber auch gern bei. :-)
<hast du schon ein fertiges layout für die platine? du könntest nämlich mal pcb-mike fragen, was das kostet. kann sein dass das sich bei einer platine nicht wirklich lohnt (ausser man will es unbedingt)<
Sind die 3 Module mit ner anderen Ausgangspfostenbelegung und sehr kompakt, hab das Design heute Abend fertig. Als Basis dient ein Ultracore.
-
Hi,
suche jemanden der mir 3 Platinen ätzen kann. ( evt sogar aus Berlin ? )
ausserdem suche ich Waldorf Knobs (auch einzelne).
Im Gegenzug dafür biete ich ein paar Teie aus meinem Fundus:
74HC165 1 Stück dip
PIC 16F88 1
16F690 2
Pic 18F452 1
DSPIC30F4013 1
DSPic30F3011 1
DSPIC30F3012 1
18F4685 1
18F2320 3
44 pin Sockel 4
Testtool Sockel 28 Pin
2,2 nF 100V 5% 30
0,33 uF MKT ERO weiss 6
ERo Red Caps zu Paaren in versch. Werten
Einbauschalter
10 Taster Platine
PS2401 DIG.Relais 4 Stück
UC3710 Mosfet driver 5 Stück
Großer schwarzer massiver Drehknopf
Ferit Entstörringe in vielen Größen
7824/TL2575/TL783/LM337 je 10
Max232 6 Stück
B250 7 Stück
6N136 4 Stück dip
CD74HC4051 8 Stück soic
TPA6120 AMP Headphone HIFI 1 Stück soic
HC595 8 Stück Soic
Zahlreiche Röhren sowie OP-Amps und 1 % Widerstände (48er Reihe) wären auch vorhanden.
4 Kanal Scart Umschalter (4 Scart und Video/Audio in + out)
4 Kanal 12 V Autoverteiler
Würde mich sehr freuen wen mir jemand Platinen mitätzen könnte
( Ebenfalls bin ich auf der Suche nach jemandem der mir 3 kleine Alustücke zuschneiden könnte,
2 für jeweils einen Encoder (je Quadrat mit 4+2 kleinen und einem großen Loch)
1 für 4 Fader und Encoder (Rechteck mit 4 Faderschlitzen 56mm + 8 Löchern , 6 kleine Löcher, 4 große Löcher) gefunden )
Vielen und lieben Gruß
Robert
-
:D
received it yesterday in Germany. Good work.
THX to NILS for Paypallpayment and ultra for the few days of waiting for me.
;D the world is wonderfull ;D
-
:D thx nILS , wrote a Mail to you
-
bitte nicht böse nehmen ;D, hatte ich gerdae noch von gestern im Kopf die Auktion, und ja hast wohl Recht mit Größe und Beleuchtung. :-[
bin ja schon still :-X , hätte ich gerade 30 € über würd ich auch gern 2 haben .
Ich glaub das wollt ich damit wohl zum Ausdruck bringen. 8)
-
becauße i'm a terrorist ( 8) paypall thinks so) i can't pay with paypal , can i pay with IBAN/SWIFT , or can anybody help me ?
-
same question as "Ultra" , would take 2
-
-
,TPic6C195 ; but not 1:1 pincompatible , just make a adapter from 2 Sockets
-
thats a board from JVC-Musik-Box (pic3) , 6 years old ;Tape and Cd-player broken , so now i have
an 2x70W+2x20W AMP with the Controlboard with AD7439 ; 4 Alps Encoders with Knops , 30 switches and a new projekt . When the equi would be controlled by a Pic then i have a Digital controlled Amp with 4 Channel In. But i think that this equi funktion in Stereo could be usefull for others ,too. if somebody interested i can copy the boardlayout to eagle or NI
The Encoders and Knops for are now the first part (FX-Control ; 6 Buttons ;3 Encoder ; 2 Pots , 8 Led's) of my midbox. Pic 4 )
-
;D Jes i have in front of me, see attachment ; Digital in ; Cinch in ; Tape ;CD 1 cabel to AMP ; 1 cable to I2C
And the Chips are here for less than 3€
Stock Reported Date**
AMERICA DIGIKEY 0 29-May-2008
ASIA/PACIFIC DIGIKEY 0 29-May-2008
EUROPE SPOERLE 272 28-May-2008
or here
-
http://www.st.com/stonline/products/literature/ds/4291/tda7439.pdf
Input multiplexer
– four stereo inputs
– selectable input gain for optimal adaptation
to different sources
! Single stereo output
! Treble, mid-range and bass control in 2-dB
steps
! Volume control in 1-dB steps
! Two speaker attenuators:
– two independent speaker controls in 1-dB
steps for balance facility
– independent mute function
! All functions are programmable via serial bus
for the Midimixer istead or to help TI PGA 43**/23** ??? Control possible with Mios ?
-
is it possible to use a " Heidenhein Encoder" like used in CNC ; they can make more than 1000sinals/U
(S) 2 Channel Mixer (3B.EQ,4 Send /Return/ect. ...)w/o Case
in Fleamarket
Posted · Edited by Zossen
Hi
have for sale the Master-sektion and 2 Channels left of my MB-Projekt
http://midibox.org/forums/gallery/image/1197-dsc00641/
(not on the Picture are the 2 LineFaders and the 2 Master Faders - are not part of the deal)
2 Channels = each (XLR+6,3) Input Gain , 3 Band EQ, 4 Send (aux1-4) (2 Pre/2 Post), Pan , Peak Led, PFL-switch
Mastersektion = Monitor / PFL, 4 Aux send = Aux 1+2 incl. PFL, 2 Return incl. PFL, Return1+2 , return 1+2 Pan
6,3 Headphones, XLR/6,3 <- send +return
2x Analog VU Meter with light
based on
Mastersektion = 2x LM380N + 8x RC455HP TI- Portugal
2 Channels = each 3 x RC455HP TI-Silver
Powersupply incl. XLR Connector
asking for 30 € + shipping
without a Case and without the Pot-caps in the picture!!
without the 4 x 100mm Alps Faders
(option: 2 x 100mm Delta Faders + 2 Pots = 8€) or (4 x60mm Fader =5€)
Could be Used for a Mixerprojekt or as a Preamp ; Line Amp, or Micamp or as a Effekt Routing station (4Send/return) ect....
best regards Zossen