-
Posts
95 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by yodabe
-
-
Ok... this one is new to me, at least it isn't officially supported.
However, you can use any track to generate accent pulses.
E.g. you could use Track 15 (by default assigned to "Ext3") for this purpose, just specify the right SR and pin number.
Best Regards, Thorsten.
ok thanks
but i'm confused with the accent part on my 808 clone
maybe you can help me
If I have understood correctly the 808 accent shematics i need 2 triggers for triggering the accent voltage
but when i connect 2 triggers i got no sound
with only one trigger (accent1 in)i have sound but not accent and the accent pot give a volume control ...
do you have an idea of the problem.?
-
.
Where did you find informations about "accent 2"
on MB-808 Revision 3 Shift Register Pins ==> http://www.eight-oh-eight.org/Rev3/shiftregistersrev3.html
-
hi,
how to change the sr pinout for the accent 1 and 2 ?
i need to attribute the accent output to sr 11 pin 0-1
but i see nothing into the setup_808_default.asm about the accent2 ...best regards
-
-
Hey,
So I want to buy some specific parts (tact switch caps - E-Switch part no. 4J) and the only place I can seem to find them are Digikey and Mouser. I'm in Ireland and the postage is pretty crazy at €20. The items themselves will probably only come in at about €5. The only options I can see when I go through to checkout is UPS and Fedex. I'd prefer to use USPS.
Does anyone in Europe have any experience of buying from either of these places and getting them to send the order via USPS? I know I'm a small fry to them and all but...
Alternatively, does anyone know of any UK or Europe sellers that have the parts I want (a long shot, I know!)
Cheers,
Karl.
-
about sidcolector on ebay : 100% working sid chip! nice shipping very nice communication about the revisions
I can also recommend too :thumbsup:
-
Create a link, then follow the link and answer 'yes' when asked if the page should be created!
Thx
-
hi
how to create a wiki page for my TWINsid ?
thx
-
Did you redo the enclosure as well?
yep -)
the plan are send to the cnc laser cutting industry
one of my friend work on this sector that's good for me
i wait for ...
-
-
V1.2 is done
i have add a new serial registers for 3 new switch (shift up and down)
...
Best Regards
Pascal
-
Salut
je te propose une config (la plus simple) mais tu va devoir revoir le nombre de boutons
64 boutons max !!!
1X pic based core pic18f452 avec midibox64 app
1x lcd 16x2
2x din module pour un max de 64 in (encoders et boutons) un encoder prend deux entrées !
2x dout module pour un max de 64 led un 74HC595=8 led
1x USB GM5 Module a condition de trouver un chip GM5 et de savoir souder du cms !! pour le GM5 voir bulk order dans le forum
pour la partie alimentation si tu charge pas en led (led ring pour les encoders)l'alim du core module doit pouvoir alimenter tout les modules sans prob. attention 1A max !
pour tes encoders voir farnell ou RS
http://be.farnell.com/alps/ec12e2420404/encoder-vertical-24-det-24ppr/dp/1520812
pour les knob :
http://be.farnell.com/alps/dk45-114-a-6/knob-6mm-flatted-black/dp/1520821
cordialement
Pascal
-
i remove the files ! have no wiring the shift Up/Down button :frantics:
see soon
-
This is all great stuff! Have you thought about putting some of this on the wiki as well?
yep of course !
i need before to create a soldering guide ...
-
-
Are the schems available in any form perhaps?
.brd eagle file (v5.1.0)
I Also, what was the wire-width you used for your control surface bits?
0.3048mm
-
-
-
pcb Quick view
main board :
best regards
-
thx all
enclosure preview in 3ds file
-
Midibox TWINsid is a light midibox sid v2 on three pcb wiht only 2 sid chip for stereo sound
and a control surface for the clasic parameter (env flt ...)
Midibox twinsid features :
Clasic 100x160mm pcb
2x16 lcd screen
The main board pcb integrated :
1 x psu parts (12v or 9v jumper setting)
1 x core module
8 x bankstick (7 for 896 patchs 1 for 128 ensemble)
1 x ltc module for midi thru and second midi out
2 x sid module
The SR board integrated the din and dout module
The CTRL board have 13 pots and 13 switchs for an easy programming
The enclosure and the pcb Layout coming soon ...
Best regards
Pascal
-
MIDI Thru, the Second MIDI Out, MIDI IN/OUT LED don't need any activation.
Best Regards, Thorsten.
Ok thx
bye
best regards
-
Please remove the changes and fix your hardware as well - it's simple!
Best Regards, Thorsten.
yep i processing a new pcb board
thx for your help Tk
best regards
-
hi
ltc module is active by defaut in midibox sid or need to be activate in .asm ?
best regards
MB808 Seq accent output
in MIDIbox SEQ
Posted
ok i find the way
mb accent trigger output to ==> tr-808 accent1 in
tr-808 accent2 in ==> connected to the gnd !