OlivierW

Hello, Thanks a lot Soclt and ultra for your offers, but I ordered and received a Midisport 2x2. Now that I got a little time, I've been able to test it and it works much better, I've been able to program the PIC with MIOSStudio :) Now I'm stuck with stupid problems : - I don't have a jack plug, so I had to solder some headphones for now. - I used connectors everywhere on the core and sid, I've tested and I've the right voltages everywhere... then I plugged every components on the SID PCB and... the J2 connector doesn't fit anymore because of the SID chip. Guess I'll have to cut this connector and solder everything directly but I don't have time right now. That's just bad something like that happen right near the end. Olivier ;)

Yes, I read that the GM5 seemed the best solution, but I don't want to wait months before there are 250 orders (if the list present here http://www.midibox.org/dokuwiki/tk_gm5_bulkorder is up to date).

Hello, I know this post is quite old... but I wanted to warn others people if they find it and do the same mistake as me : buying the Swissonic MIDI 1x1... I've built the MBHP_CORE_V3, programmed the PIC and tried to upload MIOS with the Swissonic interface, and I had overrun errors. When searching on the Internet the meaning of this error, I've discovered this page : http://www.midibox.org/dokuwiki/doku.php?id=midi_interface_blacklist. So I'm going to sell the Swisscom 1x1, and I'll probably buy a Midisport 2x2 (hoping it's better). Or I'll just use my good old computers which all have good old ISA sound card with MIDI :D Olivier ;)