Jump to content

danne71

Members
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

 Content Type 

Posts posted by danne71

  1. How To Define Shift Registers?

    in Testing/Troubleshooting

    Posted

    Dan,

    you have received extensive help but in return offered no appreciation and had only more demands -

    that is not very nice to Thorsten and us, because he spent valuable time helping you (which we are all missing now :-))

    Best regards,

    Peter

    Hello Peter

    Yes You Right ...Thanks Thorsten !!!!

    But you wrong at the "more Demands"

    READ My second question in my first entry...

    Best regards

    Dan Lind

    Sweden

  5. How To Define Shift Registers?

    in Testing/Troubleshooting

    Posted

    Works at my side.

    Did you restart your MBSEQ after changes on the MBSEQ_HW.V4 file?

    Alternatively just type the "reset" in the MIOS Terminal

    Best Regards, Thorsten.

    I have checked the hardware for shorts and the Serialdata is going in at pin 14

    and out at pin 9 (J1 SO-U7 14,U7 9-U8 14,U8 9-J2 SO.....)

    all is ok.

    But there is only 2 ShiftRegisters at the MBSeq Pcb ???

    Why Define 4?

    It must be software related ?!

    I have a small USB adapter for the MicroSD card, insert the SDcard in the PC

    Open the file with Wordpad, change the parameters and save, then back to the MBSeq and start it up.

    This is the only way it "works" to access the MicroSD, Have tried the MSD USB

    The PC only ask me to insert the disk...nothing happens what i do.

    Best Regards, Dan Lind

  6. How To Define Shift Registers?

    in Testing/Troubleshooting

    Posted · Edited by danne71

    This is a copy from Setup File for Wilba's Frontpanel

    # $Id: MBSEQ_HW.V4 1219 2011-06-02 21:34:29Z tk $

    In the Root of my SD-card

    DOUT_GATE_SR1 5

    DOUT_GATE_SR2 6

    DOUT_GATE_SR3 7

    DOUT_GATE_SR4 8

    DOUT_GATE_SR5 9

    DOUT_GATE_SR6 10

    DOUT_GATE_SR7 11

    DOUT_GATE_SR8 12

    # if set to 1, the DOUT "gates" will send 1mS pulses

    # useful for analog drums

    DOUT_1MS_TRIGGER 1

    Still get parallel signals on LED 1-16 and SR1-5, SR2-6 outputs

  7. How To Define Shift Registers?

    in Testing/Troubleshooting

    Posted · Edited by danne71

    Hello

    I want 64 triggers out on the Wilba V4 sequencer, But do not understand how the Shift registers are defined.

    Have tried to define them But its not clear to me what values 1-16 mean?

    (Allowed values: 1-16, 0 disables the function, all other values invalid and not allowed)

    0 =off,1=on 2-16= ?

    have tried different values, But the first and second gate shift register works in parallel with some leds on the sequencer.

    Can anyone Help me?

    Second:

    How to activate the Aout_ng in the Seq?

    Menu/Event/Port_AOUT/and then What?

    MIDI Channel encoding:

    Event Chn. Behaviour

    CC 1..8 (channel itself has no effect)

    CC Number #16: CV Ouput #1, Gate #1 always set

    CC Number #17: CV Ouput #2, Gate #2 always set

    CC Number #18: CV Ouput #3, Gate #3 always set

    CC Number #19: CV Ouput #4, Gate #4 always set

    CC Number #20: CV Ouput #5, Gate #5 always set

    CC Number #21: CV Ouput #6, Gate #6 always set

    CC Number #22: CV Ouput #7, Gate #7 always set

    CC Number #23: CV Ouput #8, Gate #8 always set

    CC 9 CV Ouput #1, Gate #1 always set, CC Number ignored

    CC 10 CV Ouput #2, Gate #2 always set, CC Number ignored

    CC 11 CV Ouput #3, Gate #3 always set, CC Number ignored

    CC 12 CV Ouput #4, Gate #4 always set, CC Number ignored

    CC 13 CV Ouput #5, Gate #5 always set, CC Number ignored

    CC 14 CV Ouput #6, Gate #6 always set, CC Number ignored

    CC 15 CV Ouput #7, Gate #7 always set, CC Number ignored

    CC 16 CV Ouput #8, Gate #8 always set, CC Number ignored

    Note 1 Key Value -> CV Out #1, Gate #1 triggered

    Note 2 Key Value -> CV Out #2, Gate #2 triggered

    Note 3 Key Value -> CV Out #3, Gate #3 triggered

    Note 4 Key Value -> CV Out #4, Gate #4 triggered

    Note 5 Key Value -> CV Out #5, Gate #5 triggered

    Note 6 Key Value -> CV Out #6, Gate #6 triggered

    Note 7 Key Value -> CV Out #7, Gate #7 triggered

    Note 8 Key Value -> CV Out #8, Gate #8 triggered

    Note 9 Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 and #2 triggered

    Note 10 Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #3 and #4 triggered

    Note 11 Key Value -> CV Out #5, Velocity -> CV Out #6, Gate #5 and #6 triggered

    Note 12 Key Value -> CV Out #7, Velocity -> CV Out #8, Gate #7 and #8 triggered

    Note 13 Velocity -> CV Out #1, Key Value -> CV Out #2, Gate #1 and #2 triggered

    Note 14 Velocity -> CV Out #3, Key Value -> CV Out #4, Gate #3 and #4 triggered

    Note 15 Velocity -> CV Out #5, Key Value -> CV Out #6, Gate #5 and #6 triggered

    Note 16 DOUT drum gates/triggers

    Notes to AOUT Channel #16 will be redirected to up to 64 digital outputs of the DOUT chain. Each key number triggers an individual gate for 1 mS, accordingly this mode is predestinated for drum triggers. The used shift registers have to be defined in the MBSEQ_HW.V4 file (DOUT_GATE_SR1..8)

    Sorry if my questions is stupid....

    /Dan Lind

×
×
  • Create New...