Edwin

Problem Solved. :flowers: I checked C8, I soldered it to the board whit the polarity on the wrong sides :blush: :blush: After desoldering and soldering it right, external power supply works fine.

I have a working Core32 and I am powering it thrue USB. But I'd like to power it with a wall adapter connected to J1. I tried this with several wall adapters (9V dc and 9V ac), but the Core32 doesn't do anything (LED doesn't flash at startup). I disconnected the jumper at J17. What might be wrong? How can I trouble shoot? Thanks Edwin

Last weeks I midified 3 organ manauls en a pedal board using a Core32 module and 7 DIN modules. Some pictures can be found here: http://forum.hauptwerk.com/viewtopic.php?f=15&t=6538&p=45730#p45730 Realy cool stuff, this 'midi boxing' :cool: . I like the modularity and the user support. Best regards, Edwin

I read a lot about midibox (cool stuff!) and want to midify an organ console. So I think I could make use of MIDIO128. Since I have 3 x 56 (keyboards) + 1 x 30 (pedal board) + 1 x 20 (stops/buttons) inputs, I need the following (if I am right): - 2 x CORES - 8 x DINX4 (2 for every 56 inputs, and 2 for the other inputs) Or is it possible to connect 4 additional DIN's to a core module, when not using any DOUT's? Another idea tot connect more inputs on a single core module might be using a 8x8 matrix. Are there people who succesfully adjusted/created an application for a scan matrix? Thanks for your help!! BTW: I am a newbie :rolleyes: Best regards, Edwin