VooDooSound
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by VooDooSound
-
-
I have 3 MF_NGs linked in a chain.
And it already worked some time ago.
MIOS Studio does not recognize MF_NG boards, while
amidi -p hw:4,0,0 --dumpshows incoming MIDI Events for fader movement on all MF_NGs on fader 1.
I tried to connect just one MF_NG, but that did not work eather. The boards are not showing up in MIOS Studio, no matter what I do.
What am I missing?
-
Hi,
I checked a few faders and theyall have between 13 and 15kOhms. No Touchsensors!
So I suppose it is a special ALPS OEM product for Yamaha!?
-
Hi *,
a few years ago, I got my hands on replacement parts of a Yamaha digital console. Fader boards with 24 faders in total.
Now I have the following issues:
1. How can I determine, which part number the faders have? (although ALPS only provides RSA0K11... types on their webpage)
2. It has a resistence of 14kOhms. Used with the MF_NG I have about 2cm at the top, which don't produce any values.
I tried to solder 35kOhms in parallel to acheive 10kOhm... but guess, it did not work.
Until now I did not try the motor, only the fader resistance...
Here is a picture of one.
Is there any way, I can calibrate the MF_NG for this type of fader?
Or does anyone know some other trick?
Best regards,
Ck
-
-
Hi *,
I wanted to setup the tool chain for MIOS8 development.
I downloaded Eclipse 3.1 but I cannot find a CDT version for it anymore.
The nightly builds page of CDT only provides CDT 3.2.1 (http://archive.eclipse.org/tools/cdt/builds/3.1.2/index.html) which builds against Eclipse 3.2
Could anyone share a link?
Or is there a newer toolchain?
Best Regards,
Ck
MIOS Studio does not recognize MF_NG boards
in MIDIbox Tools & MIOS Studio
Posted
Hi,
my MIDI output connector had been twisted...
I can now connect to each MF_NG seperatly again.
But in the chain, I have only access to the "Link Endpoint". Device Id 2 (MIDI Channel 3).
Device Id 0 (MIDI Channel 1) and Device Id 1 (MIDI Channel 2) cannot be found, although they send and receive MIDI data. They are configured as "Link Forwarding Points".
What am I still doing wrong?