Delavinci

Think I bought those chips from you wilba , long time ago :) But hey i'm finally going for it :p Pcb is ordered at smashtv

So I have 8sid chips (8580r5) Can I use the 8580sids on the wilba6582pcb that's available on avi showtech?

sammich completed! up and running , preset patches uploaded , all working/sounding great! One happy builder!!!

ah great this was the trouble , problem fixed with the extra shunt on JR4 ! Thx a lot ! Lets continue the build , almost there :D

I have 12V going in 500mA now , still same problem , but i'm wondering if it has to do with the jumper on JBL ; which lcd is deliverd in the sammichSIDkit , I set its jumper to 5V coz lcd marks 5V. I will make some pictures tomorrow I dont' have a camera here.

ok so i seemed to be holding some of the probes backwards , now i get no more -V , but as i read your post i saw my powersupply was on 12V , while it should only be on 9V , but now i dont get the required 5V , and the lcd dont light up at all now , could it be to low mA? ony 300mA on my powersupply

When in step 2 voltage tests on CS pcb , when i turn the trimpot full anticlockwise, i get the reversed , i get a row of ligt up retangles and black background , also when voltage checking not all is 5V , some -5V ? Can I continue installing ic's?