Search the Community
Showing results for tags 'midification'.
-
From the album: TekkStar (Tama Techstar Midification)
mount the Core - already labbeled with the Program its a 18F452 IP .... 8 years old... the board old also... -
From the album: TekkStar (Tama Techstar Midification)
Shield the Core-Module against the Trafo -
From the album: TekkStar (Tama Techstar Midification)
I replace the orginal Powerchord against a "Kaltgerätestecker" > Power Connector a hand drill to the big hole -
From the album: TekkStar (Tama Techstar Midification)
cooled controlled 5V -
From the album: TekkStar (Tama Techstar Midification)
the 2 Bridges and the 7805 at top -
From the album: TekkStar (Tama Techstar Midification)
Hole for the 7805, the Pin-Head, the 2 Bridges for +- input -
From the album: TekkStar (Tama Techstar Midification)
Find a Place for the 7805 -
From the album: TekkStar (Tama Techstar Midification)
the 7805 and his brothers.... in total we have here: -15V +15V +6V and soon +5V -
From the album: TekkStar (Tama Techstar Midification)
The Powersupply - where I add a 5V 7805 to supply the Core! -
From the album: TekkStar (Tama Techstar Midification)
Well the mixing board is away, and a small Breakout/Adapter and much more place is here -
From the album: TekkStar (Tama Techstar Midification)
By wasting the mix board, i have to build an Adapter, because on the mixing board acts also as REWIRING/ROUTING.... I thougt it where a good idea, to make also Connections for later mods (we have here + -15V what is great) -
From the album: TekkStar (Tama Techstar Midification)
Well I dont need the Mixing Board, it just Mixes a line in, and give you a headphone what I more need is PLACE!!!! -
From the album: TekkStar (Tama Techstar Midification)
Trigger Board connect to the Voices -
TekkStar Make 013 Trigger Board Build In Mounting
Phatline posted a gallery image in Members Gallery
From the album: TekkStar (Tama Techstar Midification)
Find a Place for the Trigger Board -
From the album: TekkStar (Tama Techstar Midification)
DINX4 - Trigger - Version: Building/Debugging/Testing: 2h 40min -
From the album: TekkStar (Tama Techstar Midification)
well lot of work... -
TekkStar Make 010 Trigger Board Soldering Bridges
Phatline posted a gallery image in Members Gallery
From the album: TekkStar (Tama Techstar Midification)
Some Bridges and a Vector Board -
From the album: TekkStar (Tama Techstar Midification)
all the work... -
From the album: TekkStar (Tama Techstar Midification)
4 Packages of Resistors: Vel1: 1K Vel2: 2.2K Vel3: 4.7K Vel4: 5.6K 4 Sockets for the hc595s 2x100nf Caps And one PDF from the Orginal DOUTX4 -
TekkStar Make 007 Trigger Board Velocity Fix Resistors
Phatline posted a gallery image in Members Gallery
From the album: TekkStar (Tama Techstar Midification)
I finally find standart Resistors that sound good for my ears: Vel1: 1K Vel2: 2.2K Vel3: 4.7K Vel4: 5.6K -
TekkStar Make 006 Trigger Board Velocity Trimpots
Phatline posted a gallery image in Members Gallery
From the album: TekkStar (Tama Techstar Midification)
the 5K Pots, now my Ears are in quest -
TekkStar Make 005 Trigger Board Velocity Trimpots
Phatline posted a gallery image in Members Gallery
From the album: TekkStar (Tama Techstar Midification)
One Register = 2xTrigger (with each 4 Velocity stages) -
From the album: TekkStar (Tama Techstar Midification)
Here we go - The Trigger Board A normal DOUTX4 do the job. In Serial I place 5K Trim-Potentiometers to find the correct Voltage, for every of the 4 Velocity Stages (for each Trigger seperat) -
From the album: TekkStar (Tama Techstar Midification)
Here the Backside- on the Right, you can already see the Midi-In-Outs, a Core-Power-Switch- to Reset it, and the PowerConnector (where bevore was a cable) -
From the album: TekkStar (Tama Techstar Midification)
Here is the front of the Techstar, 6 Voices: 4x Analog Toms (where was bad, because of Broken PCB...) 1x Analog Synth 1x Analog Clap