Hello,
I soldered the LEDs on a SEQ V4 panel and some of them keep glowing dim when they should be off and one is always glowing very bright. I checked for shorts but couldn't find anything. Then I changed the 74HC595s but I have still the same effect. Debugging is really difficult since I can always measure a voltage between the pins of the LEDs.
The config file is is a copy from here: http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4
According to Wilba's schematic all of the missbehaving LEDs share a connection to Out14 but I could no find a shortcut between this line and other connections on the board.
http://midibox.org/forums/index.php?app=core&module=attach§ion=attach&attach_id=8731
The Track and Track Group LEDs are less bright if I switch on the step LEDs.
The power source I'm using is a Meanwell RTP-60B with 100kHz switching frequency connected to J2 and on Core STM32. Might there probably an issue with the multiplexing frequency or do you have an idea what could be the root cause? I'm quiet lost and don't know how I can effectively troubleshoot this issue.
Martin