msi Posted June 28, 2003 Report Posted June 28, 2003 I recently finished the core modual and measured the voltages after the 7805 regulator and noticed I'm getting a regular voltage of 5.4v to 5.5 volts. I don't believe this is the proper voltage, and am wondering if its a problem with the 7805 or if its safe to use as is. The AC adaptor is measuring 9.4 volts before the rectifier, appx 11v after the rectifier, and then the 5.5 regulated supply. Thank you for your answers.William
pilo Posted June 28, 2003 Report Posted June 28, 2003 hummm if you can try to change the 7805...5.5V is high, but I don't think it can damage any device... The voltage will go down when it will power the PIC and the 6N138. ;)
Sephult Posted June 28, 2003 Report Posted June 28, 2003 I was having problems with my 7805 regulating at 5v.I am using a cheap protoboard to make my prototype, and I notice that the 7805 was too far in the board. After a little adjustment it worked fine.
Steven_C Posted July 3, 2003 Report Posted July 3, 2003 The 7805's can vary between one another, and if you damage them, they can start to regulate at higher than 5v!
Sephult Posted July 3, 2003 Report Posted July 3, 2003 Is it possible for a 7805 to regulate at 5v but give minimal current? I am having problems testing mine, any suggestions?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now